RigPix logo

AnyTone logo


Back to main

Back to AnyTone

Next mobile VHF/UHF


Copyright logo


Last modified 2021-03-16

Valid HTML 4.01 Transitional

AnyTone AT-588 UHF

A picture of AnyTone AT-588 UHF

SPECIFICATIONS

GENERAL
Type:Amateur UHF transceiver
Frequency range:TX: 430-440 MHz (400-490 MHz)
RX: 400-490 MHz
Tuning steps:5 / 6.25 / 8.33 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 KHz
Frequency stability:2.5 ppm @ -20 to +60C (-4 to +140F)
Mode:FM / NFM
Channels/memory management: 200 regular
Non-volatile EEPROM storage
Repeater shift/offset:?
Power supply:13.8 VDC 15%
Current drain/power consumption:RX: Max 600 mA
TX: Max 9 A
Antenna impedance/connector:50 ohm / SO-239
Dimensions (W*H*D):145*47*190 mm (5.71*1.85*7.48")
Weight:1.2 Kg (2.65 lb)
Other features: 1750 Hz call. CTCSS/PL. DCS, DTMF. 2-tone/5-tone.
Backlit DTMF-microphone. PC-programmable.




RECEIVER SECTION
Receiver system:Double conversion superheterodyne
1st IF: 38.85 MHz
2nd IF: 450 KHz
Sensitivity:FM: 0.25 uV (12 dB SINAD)
NFM: 0.35 uV (12 dB SINAD)
Selectivity:
Image rejection:
AF output power/speaker:2 W at 10% distortion / ? ohm
External speaker connector:




TRANSMITTER SECTION
RF output power: Hi: 45 W
Mid: 25 W
Lo: 10 W
Modulation system:
FM deviation:FM: 5 KHz
NFM: 2.5 KHz
Spurious emissions:Less than -? dB
Microphone impedance/connector:? ohm / ?-pin (Modular)
Microphone input sensitivity:? mV




MISCELLANEOUS
Manufactured:China, 20xx-20xx
Additional info:
Related documents:User manual (3.4 MB)
Modifications and fixes:
Reviews:
Options/Accessories:
- -