RigPix logo

Alinco logo


Back to main

Back to Alinco

Next mobile VHF/UHF


Copyright logo


Last modified 2024-03-27

Valid HTML 4.01 Transitional

Alinco DR-B185HT

A picture of Alinco DR-B185HT

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: USA
TX: 144-148 MHz
RX: 136-174 MHz
Tuning steps:5 / 6.25 / 10 / 12.5 / 15 / 20 / 30 / 50 KHz
Frequency stability:±2.5 ppm @ -10 to +60°C (14 to 140°F)
Mode:FM / NFM
Channels / memory management: 500 regular with alpha tags
3 scan edge pairs (Program scan)
Priority function
Non-volatile EEPROM storage
Repeater shift / offset:±0 to 99.995 MHz
Power supply:13.8 VDC ±15%
Current drain / power consumption:RX: Max 1 A
TX: Max 20 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):164*44*184 mm (6.44*1.73*7.21")
Weight:1.5 Kg (3.3 lb)
Other features: CTCSS/PL and DCS. 2-tone selcall. DTMF. Dimmer.
1000 / 1450 / 1750 / 2100 Hz tone call.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 45.1 MHz
2nd IF: 450 KHz
Sensitivity:0.25 uV (12 dB SINAD)
Selectivity:
Image rejection:65 dB
AF output power / speaker:2 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power:

HighLow
2 m:85 W5 W
Modulation system:Reactance
Max FM deviation (Factory set):FM: ±5 KHz
NFM: ±2.5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:? ohm / 8-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:China, 2015-20xx
Additional info:
Related documents: User manual (625 KB)
PA module: Mitsubishi RA80H1415M1
Modifications and fixes:
Reviews:
Options / Accessories:
- -