RigPix logo

Alinco logo


Back to main

Back to Alinco

Next mobile VHF/UHF


Copyright logo


Last modified 2024-07-03

Valid HTML 4.01 Transitional

Alinco DR-M06TH

A picture of Alinco DR-M06TH

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: TX: 50-54 MHz
RX: 50-54 MHz
Tuning steps:5 / 10 / 12.5 / 15 / 20 / 25 KHz
Frequency stability:±? ppm
Mode:FM
Channels / memory management: 100 regular
1 call
Repeater shift / offset:±0 to 15.995 MHz
Power supply:13.8 VDC ±10%
Current drain / power consumption:RX: Max 600 mA
TX: Max 5 A
Antenna impedance / connector:50 ohm / SO-239 (On pigtail)
Dimensions (W*H*D):140*40*155 mm (5.51*1.58*6.1")
Weight:800 g (1.76 lb)
Other features:CTCSS/PL.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz
Sensitivity:0.25 uV (12 dB SINAD)
Selectivity:12 KHz (-6 dB)
30 KHz (-60 dB)
Image rejection:
AF output power / speaker:2.5 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power:

HighLow
6 m:20 W2 W
Modulation system:Variable reactance
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:? ohm / 8-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 199x-20xx (Discontinued)
Additional info:New price, october 1999 in the UK: £249.95
Related documents:Service manual (1.4 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of Alinco DR-M06TH