RigPix logo

Alinco logo


Back to main

Back to Alinco

Next mobile VHF/UHF


Copyright logo


Last modified 2024-03-27

Valid HTML 4.01 Transitional

Alinco DR-140T

A picture of Alinco DR-140T

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: USA
TX: 144-148 MHz
RX: 118-174 MHz
Tuning steps:5 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 KHz
Frequency stability:±? ppm
Mode:TX: FM
RX: AM / FM
Channels / memory management: 50 regular with alpha tags (7 characters)
1 call
Repeater shift / offset:±0 to 99.995 MHz
Power supply:13.8 VDC
Current drain / power consumption:RX: Max 800 mA (Squelched)
TX: Max 10.5 A
Antenna impedance / connector:50 ohm / SO-239 (On pigtail)
Dimensions (W*H*D):141*41*154 mm (5.55*1.61*6.06")
Weight:860 g (1.9 lb)
Other features: CTCSS/PL encoder. Cloning.
1000 / 1450 / 1750 / 2100 Hz tone call.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 30.85 MHz
2nd IF: 455 KHz
Sensitivity:0.18 uV (12 dB SINAD)
Selectivity:12 KHz (-6 dB)
30 KHz (-60 dB)
Image rejection:
AF output power / speaker:2.5 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power:

HighLow
2 m:50 W5 W
Modulation system:Variable reactance frequency modulation
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:? ohm / ?-pin (Modular)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1996-199x (Discontinued)
Additional info:
Related documents:User manual (1.9 MB, multi-language)
Modifications and fixes:
Reviews:
Options / Accessories:
EJ-20U CTCSS/PL decoder unit