RigPix logo

Alinco logo


Back to main

Back to Alinco

Next mobile VHF/UHF


Copyright logo


Last modified 2024-03-27

Valid HTML 4.01 Transitional

Alinco DR-150E

A picture of Alinco DR-150E

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: Europe
TX: 144-146 MHz
RX: 108-174 / 430-440 MHz

NB! The extended VHF RX frequency range
may require modification
Tuning steps:5 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 KHz
Frequency stability:±10 ppm (No temperature reference)
Mode:TX: FM
RX: AM / FM
Channels / memory management: 100 regular
1 call
1 scan edge pair (Program scan)
Priority function
Repeater shift / offset:±600 KHz (Default, programmable)
Power supply:13.8 VDC
Current drain / power consumption:RX: Max 600 mA
TX: Max 10 A
Antenna impedance / connector:50 ohm / SO-239 (On pigtail)
Dimensions (W*H*D):140*40*129 mm (5.51*1.58*5.08")
Weight:800 g (1.76 lb)
Other features: CTCSS/PL encoder. 1K2 / 9K6 packet jack. Attenuator. Dimmer.
Channel scope. 1750 Hz tone call. Cloning. DTMF squelch (DSQ).




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 45.1 MHz
2nd IF: 455 KHz
Sensitivity: 2 m: 0.16 uV (12 dB SINAD)
70 cm: 0.3 uV (12 dB SINAD)
Selectivity:12 KHz (-6 dB)
28 KHz (-60 dB)
Image rejection:
AF output power / speaker:1.5 W at ?% distortion / 8 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

HighMidLow
2 m:50 W25 W10 W
Modulation system:Reactance
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:2.2 Kohm / 8-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1996-199x (Discontinued)
Additional info:
Related documents:User manual (781 KB)
Modifications and fixes:
Reviews:
Options / Accessories:
EJ-20U
EMS-5A
EMS-12
CTCSS/PL decoder unit with tone scan
Hand microphone
Hand microphone with DTMF keypad