RigPix logo

ADI logo


Back to main

Back to ADI

Next HT/portable


Copyright logo


Last modified 2022-10-09

Valid HTML 4.01 Transitional

ADI AT-401(HP)

A picture of ADI AT-401(HP)

SPECIFICATIONS

GENERAL
Type:Amateur UHF transceiver
Frequency range: Europe
TX: 430-440 MHz
RX: 430-480 MHz
USA
TX: 430-450 MHz
RX: 430-480 MHz
Tuning steps:5 / 10 / 12.5 / 20 / 25 / 50 KHz
Frequency stability:±? ppm
Mode:FM
Channels / memory management: 20 regular (Expandable to 40)
1 call
1 dual watch
Repeater shift / offset:±0-39.995 KHz in selected step size
Power supply:6-12 VDC (Battery pack) or 5-15 VDC external
Current drain / power consumption:RX: 13-250 mA
TX: Max 1.3 A
Antenna impedance / connector:50 ohm / BNC
Dimensions (W*H*D):55*84*31 mm (2.16*3.31*1.22"), without battery pack
Weight:185 g (6.53 oz), without antenna and battery pack
Other features: Backlit display and keypad. CTCSS/PL option. DTMF paging option.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 23.05 MHz
2nd IF: 455 KHz
Sensitivity:0.3 uV (12 dB SINAD)
Selectivity:
Image rejection:
AF output power / speaker:250 mW at 10% distortion / 8 ohm
External speaker connector:8 ohm




TRANSMITTER SECTION
RF output power:

High
@13.8V
High
@7.2V
Mid
@13.8V
Mid
@7.2V
Low
70 cm:5 W2 W2.5 W2 W350 mW
Modulation system:Reactance
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:600 ohm / ?-pin
Microphone input level:? mV




MISCELLANEOUS
Manufactured:1998-200x (Discontinued)
Additional info:
Related documents:User manual (1.6 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
CHA072
CHA120
CMP145
CTS145
DTC120
DTF145
PCA145
RBP072
RBP120
SBC145
Wall charger for RBP072
Wall charger for RBP120
Compact speaker-microphone
CTCSS/PL encoder/decoder
Desktop rapid charger for RBP072 & RBP120
DTMF encoder/decoder
DC cable
Standard battery pack. 7.2 V, 700 mAh
High power battery pack. 12 V, 600 mAh
Standard battery case for six LR6 / AA batteries