| GENERAL |
| Type: | Amateur VHF/UHF transceiver |
| Frequency range: |
Europe
TX: 144-146 / 430-440 MHz
RX: 108-174 / 350-470 / 900-985 MHz
USA
TX: 144-148 / 438-450 MHz
RX: 108-174 / 350-470 / 900-985 MHz
|
| Tuning steps: | 10 KHz (Default, programmable) |
| Frequency stability: | ±? ppm |
| Mode: | TX: FM
RX: AM / FM |
| Channels / memory management: |
120 regular (60 per band) with alpha tags (6 characters)
200 regular (100 per band), without alpha tags
2 call (1 per band)
1 scan edge pair
|
| Repeater shift / offset: | Programmable |
| Power supply: | 7.2 VDC (NiCd battery pack) or 6-16 VDC external |
| Current drain / power consumption: | RX: 20-250 mA
TX: Max 1.5 A |
| Antenna impedance / connector: | 50 ohm / BNC |
| Dimensions (W*H*D): | 61*189*43 mm (2.4*7.44*1.69"), without battery pack |
| Weight: | 380 g (13.4 oz), without battery pack and antenna |
| Other features: |
CTCSS/PL with tone scan. DTMF with paging. 1750 Hz tone call.
Cloning. PC programmable. Crossband repeater. Full duplex.
Voltmeter. Attenuator. Backlit display.
|
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: 21.9 MHz (VHF) - 23.05 MHz (UHF)
2nd IF: 450 KHz
|
| Sensitivity: |
VHF: 0.16 uV (12 dB SINAD)
UHF: 0.18 uV (12 dB SINAD)
|
| Selectivity: | |
| Image rejection: | |
| AF output power / speaker: | 450 mW at 10% distortion / 8 ohm |
| External speaker connector: | |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
| High
@13.8V | High
@7.2V | Mid | Low |
|---|
| 2 m: | 5 W | 2 W | 2 W | 350 mW |
| 70 cm: | 5 W | 1.8 W | 1.8 W | 350 mW |
|
| Modulation system: | Reactance modulation |
| Max FM deviation (Factory set): | ±5 KHz |
| Spurious emissions: | Better than -60 dBc |
| Microphone impedance / connector: | 600 ohm / ?-pin |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | 1996-199x (Discontinued) |
| Additional info: | |
| Related documents: | User manual (3.2 MB) |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
