RigPix logo

900 MHz bands logo


Back to main

Back to 900 MHz bands

Next transceiver


Reftec logo


Copyright logo


Last modified 2024-08-02

Valid HTML 4.01 Transitional

Reftec MTR 934 Mk2

A picture of Reftec MTR 934 Mk2

SPECIFICATIONS

GENERAL
Type:CB 934/81 transceiver - United Kingdom
Frequency range:934.0125-934.9625 MHz
Channels:20
Mode:FM
Frequency control:PLL
Frequency stability:±? ppm
Power supply:13.8 VDC
Current drain / power consumption:RX: Max 600 mA
TX: Max 2.5 A
Antenna impedance / connector:50 ohm / BNC
Dimensions (W*H*D):140*55*210 mm (5.51*2.16*8.27")
Weight:1.36 Kg (3 lb)
Other features:




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 21.4 MHz
2nd IF: 455 KHz
Sensitivity:1 uV (10 dB S/N)
Selectivity:
Image rejection:
AF output power / speaker:1 W at ?% distortion / 8 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power: 8 W
Modulation system:
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:600 ohms / 4-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:England, 198x-198x (Discontinued)
Additional info: Band withdrawn 1998-12-31.
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
ABC-934-1
AMC-934-1
AME-934-1
AMQ-934-1
ATN-934-1
CBB-934-1
ELS-934-1
LNC-934-1
MCN-934-1
MCS-934-1
MPS-934-1
NFS-1000
PSV-934-1
ROT-934-1
YAG-934-1
Colinear base antenna, 3 dBi
Colinear mobile antenna, 3 dBi. Including 5 m cable and BNC plug
Colinear antenna, 3 dBi. Including 5 m cable and BNC plug
Quarter wave mobile antenna. Including 5 m cable and BNC plug
10 dB attenuator, factory fitted
14 m base station cable with plugs
External speaker
BNC plug for base station cable
Noise cancelling microphone
Speech processor microphone
In-line supressor
Complete supression kit
Power supply. 12 VDC
Mast mounted antenna rotator
Four element yagi