RigPix logo

900 MHz bands logo


Back to main

Back to 900 MHz bands

Next transceiver


Alinco logo


Copyright logo


Last modified 2024-07-30

Valid HTML 4.01 Transitional

Alinco DP-500

A picture of Alinco DP-500

SPECIFICATIONS

GENERAL
Type:PRS 903/904 MHz transceiver - Japan
Frequency range:903.0125-904.9875 MHz
Channels:80 or 158 (Selectable)
Mode:FM
Frequency control:PLL
Frequency stability:±? ppm
Power supply:13.8 VDC ±10%
Current drain / power consumption:RX: 700 mA
TX: 1-2.5 A
Antenna impedance / connector:50 ohm / N-jack (On pigtail)
Dimensions (W*H*D):150*50*165 mm (5.91*1.97*6.49")
Weight:1.3 Kg (2.86 lb)
Other features:




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 58.1125 MHz
2nd IF: 450 KHz
Sensitivity:0.5 uV (20 dB QS)
Selectivity:
Image rejection:
AF output power / speaker:2 W at ?% distortion / 4 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:
HighLow
5 W200 mW
Modulation system:
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:600 ohm / 8-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 19xx-19xx (Discontinued)
Additional info:
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
- -