| GENERAL |
| Type: | Amateur VHF/UHF transceiver |
| Frequency range: |
USA
TX: 144-148 /430-450 MHz
RX: 108-1000 MHz (Cellular blocked)
|
| Tuning steps: | 5 / 6.25 / 8.33 / 10 / 12.5 / 15 / 20 / 25 / 50 / 100 KHz |
| Frequency stability: | ±2.5 ppm @ -20 to +60°C (-4 to +140°F) |
| Mode: | TX: FM / NFM / DV (C4FM FDMA, 9.6 Kbps)
RX: AM / FM / NFM / DV (C4FM FDMA, 9.6 Kbps) |
| Channels / memory management: |
1000 regular with alpha tags (500 per band)
2 home channels (1 per band)
9 PMS
RAM storage with Li-Ion battery backup
|
| Repeater shift / offset: | ±0-99.95 MHz in 50 KHz steps |
| Power supply: | 11.7-15.8 VDC |
| Current drain / power consumption: | RX: 500 mA
TX: Max 12 A |
| Antenna impedance / connector: | 50 ohm / SO-239 |
| Dimensions (W*H*D): | Transceiver: 140*40*125 mm (5.5*1.6*4.9")
Controller: 140*72*20 mm (5.5*2.8*0.8") |
| Weight: | Total: 1.2 Kg (2.64 lb) |
| Other features: |
Large 3.5" color touch screen. APRS functions. Packet 1200/9600bd ready.
Spectrum scope. ARTS. Built-in GPS. Micro-SD card. Twin RX.
|
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: 47.25 MHz (A-band), 44.85 MHz (B-band)
2nd IF: 450 KHz
|
| Sensitivity: | 140-150 MHz: 0.2 uV (12 dB SINAD)
420-470 MHz: 0.2 uV (12 dB SINAD) |
| Selectivity: | AM/FM: 12 KHz (-6 dB)
35 KHz (-60 dB) |
| Image rejection: | |
| AF output power / speaker: | 3 W at 10% distortion / 8 ohm |
| External speaker connector: | 3.5 mm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
| High | Mid | Low |
|---|
| 2 m: | 50 W | 20 W | 5 W |
| 70 cm: | 50 W | 20 W | 5 W |
|
| Modulation system: | FM: Variable reactance
DV: 4FSK/C4FM |
| Max FM deviation (Factory set): | FM: ±5 KHz
NFM: ±2.5 KHz |
| Spurious emissions: | Better than -60 dB |
| Microphone impedance / connector: | 2 Kohm / 8-pin (Modular) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | 2012-2015 (Discontinued) |
| Additional info: | |
| Related documents: |
User manual (76 MB)
Service manual (29 MB)
FTM-400DR/DE Wires-X manual (17.4 MB)
|
| Modifications and fixes: | |
| Reviews: | |
| Options/Accessories: |
BH-2A
BU-2
CD-40
CT-162
FVS-2
HRI-200
MH-42C6J
MH-48A6JA
MH-85A11U
MLS-200-M10
MMB-98
SCU-20
SMB-201
ADMS-M400
|
Bluetooth headset. Requires BU-2 and CD-40
Bluetooth adaptor unit
Charger cradle for BH-2A
Separation cable. 6 m (19.6 ft)
Voice guide unit
WIRES-X internet linking interface and software
Standard hand microphone
Hand micreophone with DTMF
Hand microphone with built-in camera
Weatherproof external speaker
Vacuum bracket for the control head
PC connection cable
Cooling fan base
Windows programming software
|
|
