| GENERAL |
| Type: | Amateur VHF/UHF transceiver |
| Frequency range: |
USA and Australia
TX: 144-148 / 430-450 MHz
RX: 108-1000 MHz (Cellular blocked in the US)
|
| Tuning steps: | 5 / 6.25 / 8.33 / 10 / 12.5 / 15 / 20 / 25 / 50 / 100 KHz |
| Frequency stability: | ±2.5 ppm @ -20 to +60°C (-4 to +140°F) |
| Mode: | TX: FM / NFM / DV (C4FM/Fusion)
RX: AM/ FM / NFM / DV (C4FM/Fusion) |
| Channels / memory management: |
1000 regular with alpha tags (16 characters)
50 scan edge pairs (PMS)
10 NOAA weather channels
Non-volatile EEPROM storage
|
| Repeater shift / offset: | ±0-99.95 MHz in 50 KHz steps |
| Power supply: | 13.8 VDC (2-pin connector on pigtail) |
| Current drain / power consumption: | RX: 500 mA
TX: Max 11 A |
| Antenna impedance / connector: | 50 ohm / SO-239 |
| Dimensions (W*H*D): |
Main unit: 139*42*132 mm (5.47*1.66*5.2")
Controller: 139*53*18 mm (5.47*2.09*0.7")
|
| Weight: | 1.1 Kg (2.43 lb), complete transceiver with controller cable |
| Other features: |
2" QVGA color TFT. CTCSS/PL and DCS with tone search. AMS. Built-in GPS.
WiRES-X. GM function. 1K2/9K6 APRS functions. VOX. Micro-SD card slot.
Band scope. Data cloning. Clock/timer. ARS. DTMF functions. Bluetooth option.
|
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: 58.05 MHz
2nd IF: 450 KHz
|
| Sensitivity: |
AM (10 dB S/N)
108-137 MHz: 0.8 uV
300-336 MHz: 0.8 uV
FM (12 dB SINAD)
137-150 MHz: 0.2 uV
150-174 MHz: 0.25 uV
174-222 MHz: 0.3 uV
222-300 MHz: 0.25 uV
336-420 MHz: 0.25 uV
420-540 MHz: 0.2 uV
800-900 MHz: 0.4 uV
900-999.99 MHz: 0.8 uV
DV/C4FM (BER 1%)
144-148 MHz: 0.19 uV
430-450 MHz: 0.19 uV
|
| Selectivity: | |
| Image rejection: | |
| AF output power / speaker: | 3 W at 10% distortion / 8 ohm |
| External speaker connector: | 3.5 mm, 8 ohm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
| High | Mid | Low |
|---|
| 2 m: | 50 W | 25 W | 5 W |
| 70 cm: | 50 W | 25 W | 5 W |
|
| Modulation system: | FM: Variable reactance
DV: C4FM/4FSK |
| Max FM deviation (Factory set): | FM: ±5 KHz
NFM: ±2.5 KHz |
| Spurious emissions: | Better than -60 dB |
| Microphone impedance / connector: | 2 Kohm / 6-pin (Modular) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Japan, 2022-202x |
| Additional info: | |
| Related documents: |
User manual (22.7 MB)
Advanced manual (8.7 MB)
APRS manual (7.6 MB)
Group Monitor manual (3.3 MB)
WIRES-X manual (3.9 MB)
Portable digital node manual (13.5 MB)
|
| Modifications and fixes: | |
| Reviews: | Practical Wireless: October 2022, page 10 |
| Options / Accessories: |
BU-4
CT-163
CT-164
CT-166
CT-167
FVS-2
MEK-5
MH-42C6J
MH-85A11U
MLS-100
MMB-98
SCU-23
SCU-40
SCU-47
SSM-85D
SSM-BT10
|
Bluetooth unit
Data cable (Mini-DIN 10-pin to Mini-DIN 6-pin + DSIB9)
Data cable (Mini-DIN 10-pin to Mini-DIN 6-pin)
Cloning cable
Data cable (Mini-DIN 10-pin to open end)
Voice guide unit
Mic extension cable kit. 3 m (10 ft)
Hand microphone
Hand microphone with snapshot camera
External speaker
Vacuum cup mount bracket for the controller
Mic extension cable for MH-85A11U
WiRES-X connection cable kit
Control cable. 6 m (20 ft)
Hand microphone with DTMF keypad
Bluetooth headset
|
|
