RigPix logo

Yaesu logo


Back to main

Back to Yaesu

Next HF and more


Copyright logo


Last modified 2024-07-03

Valid HTML 4.01 Transitional

Yaesu FTDX-560

A picture of Yaesu FTdx-560

SPECIFICATIONS

GENERAL
Type:Amateur HF transceiver
Frequency range: 10-80 m in eight bands
3.5-4.0 MHz (80 m)
7.0-7.5 MHz (40 m)
14.0-14.5 MHz (20 m)
21.0-21.5 MHz (15 m)
28.0-28.5 MHz (10 m A)
28.5-29.0 MHz (10 m B)
29.0-29.5 MHz (10 m C)
29.5-30.0 MHz (10 m D)

Plus two optional AUX bands
Also 10.0-10.5 MHz JJY/WWV (RX only)
Tuning steps:Analog / continuous
Frequency stability:100 Hz for any 30 minute period after warmup
Mode:SSB / CW
Channels / memory management: None
Repeater shift / offset:No
Power supply:Mains: 117 / 220 VAC
Current drain / power consumption:RX: ? VA
TX: Max ? VA
Antenna impedance / connector:50-100 ohm / SO-239
Dimensions (W*H*D):400*159*349 mm (15.75*6.25*13.75")
Weight:18.1 Kg (40 lb)
Other features:NB. VOX. 25/100 KHz calibrator.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 5.52-6.02 MHz
2nd IF: 3.18 MHz
Sensitivity:0.5 uV (20 dB S/N @ 14 MHz)
Selectivity: SSB/CW:
2.4 KHz (-6 dB)
4.2 KHz (-60 dB)
CW narrow (With optional filter)
600 Hz (-6 dB)
1.2 KHz (-60 dB)
Image rejection:
AF output power / speaker:1 W at ?% distortion / External only
External speaker connector:8 and 600 ohm




TRANSMITTER SECTION
RF output power:

Max pwr
SSB (PEP):~250 W (560 W input)
CW:~200 W (430-500 W input)
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -40 dB
Microphone impedance / connector:? ohm / 3-pin (1/4" jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1969-197x (Discontinued)
Additional info:New price, december 1969: $449.95
Related documents:User manual (3.4 MB)
Modifications and fixes:
Reviews:CQ: May 1970, page 34
Options / Accessories:
FLDX-2000
FV-400S
FV-401
SP-560
XF31C
Linear amplifier
External VFO
External VFO
External speaker
CW narrow filter. 600 Hz