RigPix logo

Yaesu logo


Back to main

Back to Yaesu

Next HF and more


Copyright logo


Last modified 2024-07-03

Valid HTML 4.01 Transitional

Yaesu FTDX-5000D

A picture of FTdx-5000D

SPECIFICATIONS

GENERAL
Type:Amateur HF/VHF transceiver
Frequency range: TX: 10-160 m + WARC / 6 m
RX: 0.03-60 MHz
Tuning steps:1 / 5 / 10 / 100 Hz
Frequency stability:±0.5 ppm @ -10 to +60°C (14 to 140°F), after 1 minute warmup
Mode:AM / FM / SSB / CW / RTTY / Packet
Channels / memory management: 99 regular with alpha tags
5 QMB
9 scan edge pairs (PMS)
Non-volatile EEPROM storage
Repeater shift / offset: 10 m: 0-1 MHz in 10 KHz steps
6 m: 0-4 MHz in 10 KHz steps
Power supply:Mains: 90-264 VAC (3-pin IEC C14 connector)
Current drain / power consumption:RX: 70-80 VA
TX: Max 720 VA
Antenna impedance / connector: HF: 50 ohm / SO-239 (16.7-150 ohm with ATU on)
6 m: 50 ohm / SO-239 (25-100 ohm with ATU on)
Dimensions (W*H*D):462*135*389 mm (18.19*5.32*15.31")
Weight:21 Kg (46.3 lb), +2.5 Kg (5.51 lb) for the SM-5000
Other features:CTCSS/PL. Two 32-bit floating point IF-DSP. CAT control. Twin RX.




RECEIVER SECTION
Receiver system: VFO A: Double conversion superheterodyne
1st IF: 9 MHz
2nd IF: 30 KHz (24 KHz for AM/FM)
VFO B: Triple conversion superheterodyne
1st IF: 40.455 MHz
2nd IF: 455 KHz
3rd IF: 30 KHz (24 KHz for AM/FM)
Sensitivity: AM (6 KHz BW, 10 dB S/N)
0.5-1.8 MHz: 6 uV
1.8-30 MHz: 2 uV
50-54 MHz: 1 uV
FM (16 KHz BW, 12 dB SINAD)
28-30 MHz: 0.5 uV
50-54 MHz: 0.35 uV
SSB/CW (2.4 KHz BW, 10 dB S/N)
0.5-1.8 MHz: 2 uV
1.8-30 MHz: 0.2 uV
50-54 MHz: 0.125 uV
Selectivity: AM:
6 KHz (-6 dB)
15 KHz (-60 dB)
FM:
12 KHz (-6 dB)
30 KHz (-60 dB)
SSB:
2.4 KHz (-6 dB)
3.6 KHz (-60 dB)
CW:
500 Hz (-6 dB)
750 Hz (-60 dB)
Image rejection:70 dB (HF)
60 dB (6 m)
AF output power / speaker:2.5 W at 10% distortion / 4 ohm
External speaker connector:3.5 mm, 4-8 ohm




TRANSMITTER SECTION
RF output power:

HF6 m
AM:5-50 W5-50 W
FM:10-200 W10-200 W
SSB (PEP):10-200 W10-200 W
SSB (Class A):10-75 W10-75 W
CW:10-200 W10-200 W
Modulation system: AM: Low-level (Early stage)
FM: Variable reactance
SSB: Balanced
Max FM deviation (Factory set):Normal: ±5 KHz
Narrow: ±2.5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:200 ohm to 10 Kohm (600 ohm nominal) / 8-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 2009-20xx (Discontinued)
Additional info: The SM-5000 station monitor is included from factory with this D version
New price 2012 in Sweden: SEK 57950:-
Related documents: Brochure (10.2 MB)
User manual (10.3 MB)
CAT manual (249 KB)
DSP: TMS320C6727B
RF finals: VRF150
Modifications and fixes:
Reviews:
Options / Accessories:
DMU-2000
MD-200A8X
MTU-30/20
MTU-80/40
MTU-160
RF MU-2000
SP-2000
T9101556
VL-1000
XF-126CN
YH-77STA
Data management unit
Desktop microphone
External µ-Tuning unit for 20 & 30 meters
External µ-Tuning unit for 40 & 80 meters
External µ-Tuning unit for 160 meters
RF µ-Tuning kit (Required to house MTU units)
External speaker with filters
Antenna rotator connection cable
Linear amplifier
300 Hz roofing filter
Lightweight headphones
A rear picture of FTdx-5000