RigPix logo

Yaesu logo


Back to main

Back to Yaesu

Next HF and more


Copyright logo


Last modified 2023-09-17

Valid HTML 4.01 Transitional

Yaesu FTDX-100

A picture of Yaesu FTDX-100

SPECIFICATIONS

GENERAL
Type:Amateur HF transceiver
Frequency range: 10-80 m in eight bands
3.5-4.0 MHz (80 m)
7.0-7.5 MHz (40 m)
14.0-14.5 MHz (20 m)
21.0-21.5 MHz (15 m)
28.0-28.5 MHz (10 m A)
28.5-29.0 MHz (10 m B)
29.0-29.5 MHz (10 m C)
29.5-30.0 MHz (10 m D)

Plus three optional AUX bands
Tuning steps:Analog / continuous
Frequency stability:
Mode:AM / SSB / CW
Channels / memory management: 3 optional
XTAL controlled
Repeater shift / offset:No
Power supply:Mains: 100 / 110 / 117 / 200 / 220 / 234 VAC
or 12 VDC with optional DC-DC converter
(12-pin Jones connector)
Current drain / power consumption:RX: 35 W
TX: Max 150 W
Antenna impedance / connector:40-100 ohm / SO-239
Dimensions (W*H*D):334*153*262 mm (13.15*6.02*10.31")
Weight:13.61 Kg (30 lb)
Other features:VOX. 100 KHz calibrator.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne
IF: 3.18 MHz
Sensitivity:Less than 1 uV (10 dB S+N/N)
Selectivity:2.3 KHz (-6 dB)
4.5 KHz (-55 dB)
Image rejection:
AF output power / speaker:1 W at 10% distortion / ? ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

Pwr
AM:~15 W (50 W input)
SSB (PEP):~65 W (120 W input)
CW:~65 W (120 W input)

NB! Output power i slightly less on 10 m
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -40 dB
Microphone impedance / connector:? ohm / 3-pin (1/4" jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1967-196x (Discontinued)
Additional info:
Related documents:User manual (1.6 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of Yaesu FTDX-100