GENERAL |
Type: | Amateur F transceiver |
Frequency range: |
Europe, version B & C
TX: 430-440 MHz
RX: 430-440 MHz
USA, version A
TX: 440-450 MHz
RX: 440-450 MHz
Version X
TX: 430-440 MHz
RX: 430-440 MHz
|
Tuning steps: | 12.5 / 25 KHz |
Frequency stability: | ±5 ppm @ -5 to +50°C (23 to 122°F) |
Mode: | FM |
Channels / memory management: |
10 regular
1 scan edge pairs (PMS)
Priority function
RAM storage with lithium battery backup
|
Repeater shift / offset: |
±5 MHz (Version A: USA)
-7.6 MHz (Version B: Europe)
+1.6 MHz (Version C: Europe)
±5 MHz (Version X)
|
Power supply: | ? VDC ±15% |
Current drain / power consumption: | RX: 600 mA (Squelched) TX: Max 6 A |
Antenna impedance / connector: | 50 ohm / N-jack (On pigtail) |
Dimensions (W*H*D): | 140*40*162 mm (5.51*1.58*6.38") |
Weight: | 1.2 Kg (2.65 lb) |
Other features: | 1750 Hz repeater tone (Europe), 1800 Hz (USA). |
|
|
|
|
RECEIVER SECTION |
Receiver system: |
Double conversion superheterodyne
1st IF: 21.6 MHz
2nd IF: 455 KHz
|
Sensitivity: | 0.2 uV (12 dB SINAD) |
Selectivity: | 14 KHz (-6 dB) 28 KHz (-60 dB) |
Image rejection: | |
AF output power / speaker: | 1.5 W at 5% distortion / 8 ohm |
External speaker connector: | 3.5 mm, 4-16 ohm |
|
|
|
|
TRANSMITTER SECTION |
RF output power: |
|
Modulation system: | Variable reactance |
Max FM deviation (Factory set): | ±5 KHz |
Spurious emissions: | Better than -60 dB |
Microphone impedance / connector: | 600 ohm / 8-pin (Metal locking ring connector) |
Microphone input level: | ? mV |
|
|
|
|
MISCELLANEOUS |
Manufactured: | Japan, 198x-19xx (Discontinued) |
Additional info: | |
Related documents: |
User manual (6.3 MB)
RF power module: Mitsubishi M57729
|
Modifications and fixes: | |
Reviews: | |
Options / Accessories: |
FTS-8
FVS-1
MF-1A3B
MH-14A8
MH-14B8
MH-15A8
MMB-26
SB-10
SP-55
STAND-1
YH-1
|
CTCSS/PL encoder/decoder unit
Voice synthesizer unit
Boom microphone with flexible arm
Hand microphone with up/down buttons
Speaker-microphone with up/down buttons
Hand microphone with DTMF keypad
Mobile mounting bracket
PTT switch unit, for MF-1A3B and YH-1
External speaker
Wire stand for desktop operation
Headset
|
|