GENERAL |
Type: | Amateur UHF transceiver |
Frequency range: |
Europe
TX: 430-440 MHz
RX: 430-440 MHz
USA
TX: 430-450 MHz
RX: 430-450 MHz
|
Tuning steps: | 5 / 10 / 12.5 / 15 / 20 / 25 / 50 KHz |
Frequency stability: | ±10 ppm @ -10 to +50°C (14 to 122°F) |
Mode: | FM |
Channels / memory management: |
49 regular
1 call
2 scan edge pairs (PMS)
Priority function
RAM storage with lithium battery backup
|
Repeater shift / offset: |
±1.6 or 7.6 MHz (Europe)
±5 MHz (USA)
(Defaults, programmable in 50 KHz steps)
|
Power supply: | 13.8 VDC ±10% |
Current drain / power consumption: | RX: 700 mA TX: Max 10 A |
Antenna impedance / connector: | 50 ohm / N-jack |
Dimensions (W*H*D): | 140*40*160 mm (5.51*1.58*6.3") |
Weight: | 1.25 Kg (2.76 lb) |
Other features: |
ARS. 1750 Hz tone call (Europe). CTCSS/PL encoder.
DTMF pager. CAT control.
|
|
|
|
|
RECEIVER SECTION |
Receiver system: |
Double conversion superheterodyne
1st IF: 45.1 MHz
2nd IF: 455 KHz
|
Sensitivity: | 0.21 uV (12 dB SINAD) |
Selectivity: | 12 KHz (-6 dB) 30 KHz (-60 dB) |
Image rejection: | 65 dB |
AF output power / speaker: | 1.5 W at 5% distortion / 8 ohm |
External speaker connector: | 3.5 mm, 4-16 ohm |
|
|
|
|
TRANSMITTER SECTION |
RF output power: |
| High | Mid | Low |
70 cm: | 35 W | 20 W | 5 W |
|
Modulation system: | Variable reactance |
Max FM deviation (Factory set): | ±5 KHz |
Spurious emissions: | Better than -60 dB |
Microphone impedance / connector: | 2 Kohm / 8-pin (Metal locking ring connector) |
Microphone input level: | ? mV |
|
|
|
|
MISCELLANEOUS |
Manufactured: | Japan, 1993-199x (Discontinued) |
Additional info: | |
Related documents: | |
Modifications and fixes: | |
Reviews: | |
Options / Accessories: |
DVS-3
FP-700
FTS-27
MF-1A3B
MH-26D8
MH-27B8
MW-2
SB-10
SP-7
YH-1
|
Digital voice recording unit
AC power supply
CTCSS/PL decoder unit
Boom microphone
Hand microphone with 1750 Hz tone call button
Hand microphone with DTMF keypad
Remote control/wireless microphone
PTT switch unit, for MF-1A3B or YH-1
External speaker
Headset
|
|