| GENERAL |
| Type: | Amateur UHF transceiver |
| Frequency range: |
Japanese domestic market
TX: 430-440 MHz
RX: 430-440 MHz
|
| Tuning steps: | 10 / 20 KHz |
| Frequency stability: | ±5 ppm @ -5 to +50°C (23 to 122°F) |
| Mode: | FM |
| Channels / memory management: |
? regular
? call
? scan edge pairs (PMS)
Priority function
RAM storage with lithium battery backup
|
| Repeater shift / offset: | ±5 MHz |
| Power supply: | 13.8 VDC ±15% |
| Current drain / power consumption: | RX: 300 mA
TX: Max 2.6 A |
| Antenna impedance / connector: | 50 ohm / SO-239 (On pigtail) |
| Dimensions (W*H*D): | 140*40*163 mm (5.51*1.58*6.42") |
| Weight: | 1.2 Kg (2.65 lb) |
| Other features: | CAT & AQS system. Dimmer. |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: 17.2 MHz
2nd IF: 455 KHz
|
| Sensitivity: | 0.2 uV (12 dB SINAD) |
| Selectivity: | 12 KHz (-6 dB)
24 KHz (-60 dB) |
| Image rejection: | |
| AF output power / speaker: | 1.5 W at 5% distortion / 8 ohm |
| External speaker connector: | 3.5 mm, 4-16 ohm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
|
| Modulation system: | Variable reactance |
| Max FM deviation (Factory set): | ±5 KHz |
| Spurious emissions: | Better than -60 dB |
| Microphone impedance / connector: | 600 ohm / 8-pin (Metal locking ring connector) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Japan, 198x-198x (Discontinued) |
| Additional info: | |
| Related documents: | RF power module: Mitsubishi M57704M |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
FMP-1
FP-80A
FP-700
FTS-8
MH-14C8
MMB-26
SP-55
|
AQS message processor
AC power supply. 13.8 VDC, 4.5 A
AC power supply. 13.8 VDC, 22 A. Built-in speaker
CTCSS/PL unit
Hand microphone with up/down switch and AQS functions
Mobile mounting bracket
External speaker
|
|
