RigPix logo

Yaesu logo


Back to main

Back to Yaesu

Next mobile VHF/UHF


Copyright logo


Last modified 2026-10-23

Valid HTML 4.01 Transitional

Yaesu FT-2 AUTO

A picture of Yaesu FT-2 AUTO

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: Europe
TX: 144-146 MHz
RX: 144-146 MHz
USA
TX: 146-148 MHz
RX: 146-148 MHz
Tuning steps:Channelized
Frequency stability:±0.001% (No temperature reference)
Mode:FM
Channels / memory management: 8 regular
1 priority
XTAL controlled
Scanning @ 20 channels per second
Repeater shift / offset:According to XTALs
Power supply:Mains: 117 / 200 / 220 / 234 VAC
or 12-14 VDC
Current drain / power consumption:RX: 530 mA @ 13.8 VDC
TX: Max 2.1 A @ 13.8 VDC
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):210*95*270 mm (8.27*3.74*10.63")
Weight:4.2 Kg (9.26 lb)
Other features: AFC (Early version). Local/DX switch.
1800 Hz repeater tone burst (1300-3000 Hz adjustable).




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz
Sensitivity:1 uV (20 dB quieting)
Squelch sensitivity:
Noise figure:
Selectivity:30 KHz (-6 dB)
50 KHz (-60 dB)
Image rejection:
AF output power / speaker:2 W at 10% distortion / 4 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

HighLow
2 m:10 W1 W
Modulation system:
Max AM modulation (Factory set):No AM
Max FM deviation (Factory set):±5 KHz (Adjustable up to ±15 KHz)
Spurious emissions:Better than -60 dB
Microphone impedance / connector:600 ohm / 4-pin (Male GX16 locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1972-197x (Discontinued)
Reset procedure:-
Additional info: New price 1974 in the US: $379.00
Related documents: User/service manual (10.7 MB)
AF amplifier: AN212 (Early) or AN214 (Later)
Modifications and fixes:
Reviews:
Options / Accessories:
- -