GENERAL |
Type: | Amateur VHF transceiver |
Frequency range: |
TX: 144-146 MHz
RX: 144-146 MHz
(The frequency range is divided into four 500 KHz segments)
|
Tuning steps: | Continuous |
Frequency stability: | ±? ppm |
Mode: | FM / SSB / CW |
Channels / memory management: |
4 optional
XTAL controlled
|
Repeater shift / offset: | -600 KHz |
Power supply: | Mains: 100 / 110 / 117 / 200 / 220 / 234 VAC or 12-14.5 VDC |
Current drain / power consumption: | RX: 600 mA (DC) or 30 VA (AC) TX: Max 3 A (DC) or max 90 VA (AC) |
Antenna impedance / connector: | 50 ohm / SO-239 |
Dimensions (W*H*D): | 280*125*295 mm (11*4.92*11.6") |
Weight: | 8.5 Kg (18.74 lb) |
Other features: |
VOX. NB. 100 KHz calibrator.
Repeater tone burst, 1300-3000 Hz adjustable
|
|
|
|
|
RECEIVER SECTION |
Receiver system: |
Single conversion superheterodyne (SSB/CW)
IF: 10.7 MHz
Double conversion superheterodyne (FM)
1st IF: 10.7 MHz
2nd IF: 455 KHz
|
Sensitivity: |
FM: -4 dBV (20 dB QS)
SSB/CW: 0.5 uV (10 dB S/N)
|
Selectivity: |
Europe and USA
FM: 15 KHz (-6 dB), 25 KHz (-60 dB)
SSB/CW: 2.4 KHz (-6 dB), 4.1 KHz (-60 dB)
Japanese domestic market
FM: 20 KHz (-6 dB), 40 KHz (-60 dB)
SSB/CW: 2.4 KHz (-6 dB), 4.1 KHz (-60 dB)
|
Image rejection: | 60 dB |
AF output power / speaker: | 2 W at 10% distortion / 4 ohm |
External speaker connector: | 3.5 mm, 4 ohm |
|
|
|
|
TRANSMITTER SECTION |
RF output power: |
| Max pwr |
FM: | 10 W |
SSB (PEP): | 10 W |
CW: | 10 W |
|
Modulation system: | FM: Variable reactance |
Max FM deviation (Factory set): | ±5 KHz (Europe and USA) ±12 KHz (Japanese domestic market) |
Spurious emissions: | Better than -60 dB |
Microphone impedance / connector: | 500-600 ohm / 4-pin (Metal locking ring connector) |
Microphone input level: | ? mV |
|
|
|
|
MISCELLANEOUS |
Manufactured: | Japan, 1974-1974 (Discontinued) |
Additional info: | |
Related documents: |
User manual (5.1 MB)
Schematic (1.1 MB)
|
Modifications and fixes: | |
Reviews: | |
Options / Accessories: |
|