GENERAL |
Type: | Amateur VHF transceiver |
Frequency range: |
Europe
TX: 144-146 MHz
RX: 144-146 MHz
USA
TX: 144-148 MHz
RX: 144-148 MHz
|
Tuning steps: | 12.5 / 25 KHz (Europe) 5 / 10 KHz (USA) |
Frequency stability: | ? ppm |
Mode: | FM |
Channels / memory management: |
10 regular
RAM storage with lithium battery backup
|
Repeater shift / offset: | ±600 KHz |
Power supply: | 6-15 VDC |
Current drain / power consumption: | RX: 45-150 mA TX: Max 1 A |
Antenna impedance/connector: | 50 ohm / BNC |
Dimensions (W*H*D): | 65*168*34 mm (2.56*6.61*1.34") |
Weight: | 557 g (19.65 oz), with FNB-3 |
Other features: | 1750 Hz tone burst (Europe). VOX. |
|
|
|
|
RECEIVER SECTION |
Receiver system: |
Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz
|
Sensitivity: | 0.25 uV (12 dB SINAD) |
Selectivity: | 15 KHz (-6 dB) 30 KHz (-60 dB) |
Image rejection: | |
AF output power/speaker: | 450 mW at 10% distortion / 8 ohm |
External speaker connector: | |
|
|
|
|
TRANSMITTER SECTION |
RF output power: |
| High | Low |
2 m: | 2.3-5 W | 500 mW |
NB! High output level depends on battery pack/voltage)
|
Modulation system: | Variable reactance |
Max FM deviation (Factory set): | ±5 KHz |
Spurious emissions: | Better than -60 dB |
Microphone impedance / connector: | 2 Kohm / ?-pin |
Microphone input level: | ? mV |
|
|
|
|
MISCELLANEOUS |
Manufactured: | Japan, 1984-198x (Discontinued) |
Additional info: | |
Related documents: | User manual (4.6 MB) |
Modifications and fixes: | |
Reviews: | |
Options / Accessories: |
FNB-3A
FNB-4A
FNB-5A
CSC-17
CSC-18
FTS-6
YH-2
MH-12A2B
NC-9B
NC-9C
NC-18B
NC-18C
NC-15
PA-3
MMB-21
|
425 mAh NiCd battery pack
500 mAh NiCd battery pack
6*R6/AA dry cell battery case
Soft case for use with FNB-3A or 5A
Soft case for use with FNB-4A
CTCSS/PL unit (US model only)
Headset
Speaker-microphone
Compact charger (117 VAC) for FNB-3A
Compact charger (220 VAC) for FNB-3A
Compact charger (117 VAC) for FNB-4A
Compact charger (220 VAC) for FNB-4A
Quick charger/DC supply
DC car adapter/trickle charger
Mobile hanger bracket
|
|