| GENERAL |
| Type: | Amateur HF transceiver |
| Frequency range: |
10-80 m in 8 bands
3.5-4.0 MHz (80 m)
7.0-7.5 MHz (40 m)
14.0-14.5 MHz (20 m)
21.0-21.5 MHz (15 m)
28.0-28.5 MHz (10 m A), optional
28.5-29.0 MHz (10 m B)
29.0-29.5 MHz (10 m C), optional
29.5-30.0 MHz (10 m D), optional
|
| Tuning steps: | Analog / continuous |
| Frequency stability: | Within 100 Hz every 30 minute period after warmup |
| Mode: | AM / SSB / CW |
| Channels / memory management: |
None
|
| Repeater shift / offset: | No |
| Power supply: | Mains: 117 or 234 VAC (Separate FP-200 PSU)
or 12 VDC (Separate DC-200 PSU) |
| Current drain / power consumption: | RX: ? mA
TX: Max ? A |
| Antenna impedance / connector: | 50-75 ohm / SO-239 |
| Dimensions (W*H*D): | 330*140*279 mm (13*5.5*11") |
| Weight: | 7.26 Kg (16 lb) |
| Other features: | VOX. ANL. 100 KHz calibrator. |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Single conversion superheterodyne
IF: 9 MHz
|
| Sensitivity: | 0.5 uV (10 dB S/N) |
| Selectivity: | SSB: 2.3 KHz (-6 dB)
4 KHz (-60 dB) |
| Image rejection: | 50 dB |
| AF output power / speaker: | 1 W at 10% distortion / External only |
| External speaker connector: | 8 and 600 ohm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
| Max pwr |
|---|
| AM: | +40 W |
| SSB (PEP): | +100 W |
| CW: | +100 W |
|
| Modulation system: | |
| Max FM deviation (Factory set): | No FM |
| Spurious emissions: | Better than -? dB |
| Microphone impedance / connector: | ? ohm / 3-pin (6.3 mm / ¼") |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Japan, 1969-197x (Discontinued) |
| Additional info: |
Two 6JS6A finals
Early version had a silver front, while later version was
black with slightly changed functions.
Also sold as Henry Tempo One and Sommerkamp FT-250.
New price 1969 in Australia: $345.00 AUD
New price 1977 in Sweden: SEK 3650:-
|
| Related documents: | User manual (1.5 MB) |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
DC-200
FLDX-2000
FP-200
FV-200
|
DC power supply. 12 VDC.
Linear amplifier. ~600 W (1.2 KW input)
Matching PSU with speaker
External VFO
|
|
