| GENERAL |
| Type: | Amateur HF transceiver |
| Frequency range: |
TX: 10-160 m
RX: 10-160 m / WWV/JJY (10-10.5 MHz) / 26.9-27.5 MHz
The AUX position provides one optional 500 KHz band
segment between 14.5 to 28.0 MHz.
|
| Tuning steps: | Analog / continuous |
| Frequency stability: | Less than 100 Hz drift in any 30 minute period |
| Mode: | AM / SSB / CW |
| Channels / memory management: |
2 optional
XTAL controlled
|
| Repeater shift / offset: | No |
| Power supply: |
Mains: 100 / 110 / 117 / 200 / 220 / 234 VAC
or 11-14 VDC
A twelve-prong Amphenol/Cinch-Jones connector
has to be wired for either mains or DC voltage
|
| Current drain / power consumption: | RX: 45 W @ mains - 600 mA @ 12 VDC
TX: Max 350 W @ mains - Max 21 A @ 12 VDC |
| Antenna impedance / connector: | 50-75 ohm / SO-239 |
| Dimensions (W*H*D): | 334*148*284 mm (13.15*5.83*11.18") |
| Weight: | 13.6 Kg (29.98 lb) |
| Other features: |
NB. VOX. XTAL-calibrator (25 & 100 KHz).
3.18 MHz IF output.
|
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: 5.52-6.02 MHz
2nd IF: 3.18 MHz
|
| Sensitivity: | 0.3 uV (10 dB S/N) |
| Selectivity: |
AM/SSB/CW
2.4 KHz (-6 dB)
4 KHz (-60 dB)
CW (With optional narrow filter)
600 Hz (-6 dB)
1.2 KHz (-60 dB)
|
| Image rejection: | |
| AF output power / speaker: | 3 W at ?% distortion / ? ohm |
| External speaker connector: | 4 ohm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
| Max pwr |
|---|
| AM: | +40 W |
| SSB (PEP): | +100 W |
| CW: | +100 W |
NB! Output power is slightly lower on 10 m
|
| Modulation system: | |
| Max FM deviation (Factory set): | No FM |
| Spurious emissions: | Better than -40 dB |
| Microphone impedance / connector: | ? ohm / 4-pin (Metal locking ring connector) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Japan, 1977-197x (Discontinued) |
| Additional info: |
Hybrid transceiver with a 12BY7A driver and two 6JS6C finals.
Extreme economy model. Same as FT-101F but with the speech processor, DC converter,
160 m, 10 m B, C and D XTAL's now as options.
|
| Related documents: | User manual (3.8 MB) |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
