RigPix logo

Yaesu logo


Back to main

Back to Yaesu

Next HF and more


Copyright logo


Last modified 2023-09-17

Valid HTML 4.01 Transitional

Yaesu FT-100 (Older)

A picture of Yaesu FT-100 (Older)

SPECIFICATIONS

GENERAL
Type:Amateur HF transceiver
Frequency range: 10-80 m in 5 bands
3.5-4.0 MHz (80 m)
7.0-7.5 MHz (40 m)
14.0-14.5 MHz (20 m)
21.0-21.5 MHz (15 m)
28.5-29.0 MHz (10 m)
Tuning steps:Analog / continuous
Frequency stability:±? ppm
Mode:AM / SSB / CW
Channels / memory management: 4 optional
XTAL controlled
Repeater shift / offset:No
Power supply:Mains: 100 / 110 / 117 / 200 / 220 / 234 VAC
or 12 VDC
(12-pin Jones connector)
Current drain / power consumption:RX: Max 500 mA @ 12 VDC
TX: Max 13 A @ 12 VDC
Antenna impedance / connector:40-100 ohm / SO-239
Dimensions (W*H*D):267*152*330 mm (10.5*6*13")
Weight:13.61 Kg (30 lb)
Other features:




RECEIVER SECTION
Receiver system: Single conversion superheterodyne
IF: 3.18 MHz
Sensitivity:1 uV (10 dB S/S+N)
Selectivity:2.1 KHz (-6 dB)
4.5 KHz (-60 dB)
Image rejection:
AF output power / speaker:1 W at 10% distortion / ? ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

Max pwr
AM:? W
SSB (PEP):~60 W (120 W input)
CW:? W
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 3-pin (6.3 mm / ¼")
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1966-196x (Discontinued)
Additional info: 12BY7 driver, two 6JM6 finals
New price 1967 in Australia: $650.00 AUD
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
- -