RigPix logo

Yaesu logo


Back to main

Back to Yaesu

Next receiver


Copyright logo


Last modified 2022-07-26

Valid HTML 4.01 Transitional

Yaesu FRG-7

A picture of Yaesu FRG-7

SPECIFICATIONS

GENERAL
Type:HF receiver
Frequency range: 0.5-29.9 MHz in four bands
A - 0.5-1.6 MHz
B - 1.6-4.0 MHz
C - 4.0-11.0 MHz
D - 11.0-29.9 MHz
Tuning steps:Continuous
Frequency stability:Less than 500 Hz at any 30 minute period after warmup
Mode:AM / SSB / CW
Channels / memory management:None
Power supply: Mains: 100 / 110 / 117 / 200 / 220 / 234 VAC (Fixed power cord)
or 13.5 VDC (Barrel connector, center positive)
Battery option (Eight R20 / D)
Current drain / power consumption:14 VA @ mains
Antenna impedance / connector: Below 1.6 MHz: Hi-Z / Spring terminals
Above 1.6 MHz: 50 ohms / SO-239
Dimensions (W*H*D):340*153*285 mm (13.4*6.02*11.22")
Weight:7 Kg (15.43 lb)
Other features:ANL. DX/Local switch. Tone switch.




RECEIVER SECTION
Receiver system: Triple conversion superheterodyne
1st IF: 54.6-55.5 MHz
2nd IF: 2.1-3 MHz
3rd IF: 455 KHz
Sensitivity: AM: <2 uV (10 dB S/N)
SSB/CW: <0.7 uV (10 dB S/N)
Selectivity: 6 KHz (-6 dB), 14 KHz (-50 dB)
Image rejection:
AF output power / speaker:2 W at ?% distortion / 4 ohm
External speaker connector:3.5 mm




MISCELLANEOUS
Manufactured:Japan, 1976-1980 (Discontinued)
Additional info: Early version did not feature the fine tuning knob.
New price 1977 in Sweden: SEK 1995:-
Related documents: User manual (10.2 MB)
Schematic (3.3 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -
An inside top picture of Yaesu FRG-7
An inside bottom picture of Yaesu FRG-7
A rear picture of Yaesu FRG-7