GENERAL |
Type: | Amateur HF transceiver |
Frequency range: |
10-160 m + WARC in twelve bands
160 m: |   1.8-2.3 MHz |
80 m: |   3.5-4.0 MHz |
40 m: |   7.0-7.5 MHz |
30 m: |   10.0-10.5 MHz |
20 m: |   14.0-14.5 MHz |
17 m: |   18.0-18.5 MHz |
15 m: |   21.0-21.5 MHz |
12 m: |   24.5-25.0 MHz |
10 m A: |   28.0-28.5 MHz |
10 m B: |   28.5-29.0 MHz |
10 m C: |   29.0-29.5 MHz |
10 m D: |   29.5-30.0 MHz |
|
Tuning steps: | Analog / continuous vernier, ~18 KHz per revolution |
Frequency stability: | ±? ppm |
Mode: | SSB / CW |
Channels / memory management: |
None
|
Repeater shift / offset: | No |
Power supply: | 12-14 VDC |
Current drain / power consumption: | RX: 850 mA TX: Max 18.5 A |
Antenna impedance / connector: | 50-75 ohm / SO-239 50-75 ohm / Phono (RCA) for RX only |
Dimensions (W*H*D): | 362*140*356 mm (14.25*5.5*14") |
Weight: | 6.58 Kg (14.5 lb) |
Other features: | VOX. NB. |
|
|
|
|
RECEIVER SECTION |
Receiver system: |
Single conversion superheterodyne
IF: 9 MHz
|
Sensitivity: |
10 m: 0.3 uV (10 dB S/N)
160 m: 2 uV (10 dB S/N)
|
Selectivity: |
2.4 KHz (-6 dB)
1.8 KHz (-6 dB), optional
500 Hz (-6 dB), optional
250 Hz (-6 dB), optional
|
Image rejection: | |
AF output power / speaker: | 1.5 W at 2% distortion / 4 ohm |
External speaker connector: | |
|
|
|
|
TRANSMITTER SECTION |
RF output power: |
| Pwr |
SSB (PEP): | 85-100 W |
CW: | 85-100 W |
|
Modulation system: | Balanced |
Max FM deviation (Factory set): | No FM |
Spurious emissions: | Better than -40 dB |
Microphone impedance / connector: | Hi-Z / 3-pin (1/4" jack) |
Microphone input level: | ? mV |
|
|
|
|
MISCELLANEOUS |
Manufactured: | USA, 1980-1981 (Discontinued) |
Additional info: |
Basically an updated Omni-D. Please note that the C is not
indicated on the front panel of this model. Just simply "Omni".
|
Related documents: | User manual (6.7 MB) |
Modifications and fixes: | |
Reviews: | |
Options / Accessories: |
217
218
219
|
500 Hz narrow CW filter
1.8 KHz narrow SSB filter
250 Hz narrow CW filter
|
|