RigPix logo

Standard logo


Back to main

Back to Standard

Next receiver


Copyright logo


Last modified 2024-11-10

Valid HTML 4.01 Transitional

Standard AX-700

A picture of Standard AX-700

SPECIFICATIONS

GENERAL
Type:VHF/UHF receiver/scanner
Frequency range:50-905 MHz
Tuning steps:10 / 12.5 / 20 / 25 KHz steps with 1 / 5 KHz fine tuning in AM mode
Frequency stability:? ppm
Mode:AM / FM / WFM
Channels / memory management: 100 regular
10 search edge pairs
RAM storage with lithium battery backup
Power supply:13.8 VDC ±15% (Male barrel jack, center positive)
Current drain / power consumption:Max 1 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):180*75*180 mm (7.09*2.95*7.09")
Weight:2.1 Kg (4.63 lb)
Other features:Bandscope. 20 dB attenuator. Recording jack.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne (AM/WFM)
1st IF: 46 MHz
2nd IF: 10.7 MHz
Triple conversion superheterodyne (FM)
1st IF: 46 MHz
2nd IF: 10.7 MHz
3rd IF: 455 KHz - Ceramic filter: CFU455E
Sensitivity: AM: <3 uV (10 dB S/N)
FM: <1.5 uV (12 dB SINAD)
WFM: <1 uV (12 dB SINAD @ 83 MHz)
Squelch sensitivity:Less than 0.2 uV @ FM (Treshold)
Noise figure:
Selectivity: FM
15 KHz (-6 dB)
30 KHz (-40 dB)
Image rejection:
AF output power / speaker:1.8 W at 10% distortion / 8 ohm
External speaker connector:TS "Minijack" (3.5 mm), 8 ohm




MISCELLANEOUS
Manufactured:Japan, 1988-199x (Discontinued)
Additional info: TV tuner front end (!)
New price 1989 in the UK: £575.00
Related documents: User manual (5.9 MB)
Schematic diagram (416 KB)
AF amplifier: TA7222AP
AM/WFM detector: BA4220B
FM-IF: TK10420D
Modifications and fixes:
Reviews:
Options / Accessories:
- -
An inside top picture of Standard AX-700 An inside bottom picture of Standard AX-700 A rear picture of Standard AX-700