| GENERAL |
| Type: | RDF receiver |
| Frequency range: |
| Beacon: | 0.175-0.4 MHz |
| Broadcast: | 0.55-1.6 MHz |
| Marine: | 1.6-4 MHz |
|
| Tuning steps: | Analog / continuous |
| Frequency stability: | ±? ppm |
| Mode: | AM / SSB / CW |
| Channels / memory management: |
1 optional
XTAL controlled
|
| Power supply: | 6 VDC (Four LR20 / D batteries) |
| Current drain / power consumption: | Max ? mA |
| Built-in antennas: | Rotatable ferrite bar
Telescopic whip |
| External antenna impedance / connector: | Hi-Z / Binding posts |
| Dimensions (W*H*D): | 260*165*220 mm (10.24*6.5*8.66") |
| Weight: | 3.6 Kg (7.94 lb), without batteries |
| Other features: | |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Single conversion superheterodyne
IF: 455 KHz
|
| Sensitivity: | |
| Selectivity: | |
| Image rejection: | |
| AF output power / speaker: | 300 mW at ?% distortion / ? ohm |
| External speaker connector: | 3.5 mm (Headphone jack) |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Japan (By Sanshin Electric Co.), 1965-1972 (Discontinued) |
| Additional info: |
This RDF receiver was sold under many different brands, but
Sanshin was the original manufacturer in Tokyo, Japan
|
| Related documents: | |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
