| GENERAL |
| Type: | Amateur dual band / dual mode repeater |
| Frequency range: |
USA
TX: 144-148 / 430-450 MHz
RX: 144-148 / 430-450 MHz
|
| Tuning steps: | 5 / 6.25 KHz |
| Frequency stability: | ±2.5 ppm (TCXO) |
| Mode: | FM / DV (C4FM) |
| Channels / memory management: | |
| Repeater shift / offset: | Freely programmable within each band |
| Signalling: |
CTCSS/PL
DSQ
DCS
|
|
| Connectivity: | |
| Power supply: | Mains: 100-240 VAC
and/or 11.7-15.8 VDC |
| Current drain / power consumption: | RX: 1.5 A
TX: Max 14 A |
| Antenna impedance / connector: | 50 ohm / Two ? |
| Dimensions (W*H*D): | 482*88*380 mm (19*3.5*15") |
| Weight: | 10 Kg (22 lb) |
| Other features: |
AMS (Auto Mode Select). 3.5" color touch panel. ID announcement feature.
Remote controller. Auto-switched battery backup support.
|
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: 47.25 MHz
2nd IF: 450 KHz
|
| Sensitivity: | FM: 0.2 uV (12 dB SINAD)
DV: 0.3 uV (BER 1%) |
| Selectivity: | 12 KHz (-6 dB), 35 KHz (-60 dB) |
| Image rejection: | |
| AF output power / speaker: | ? W at ?% distortion / ? ohm |
| External speaker connector: | |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
| High | Mid | Low |
|---|
| 2 m: | 50 W | 20 W | 5 W |
| 70 cm: | 50 W | 20 W | 5 W |
|
| Modulation system: | FM: Variable reactance
DV: 4FSK |
| Max FM deviation (Factory set): | ±5 KHz |
| Spurious emissions: | Better than -60 dB |
| Microphone impedance / connector: | ? ohm / 6-pin (Modular) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | 2014-2017 (Discontinued) |
| Additional info: | |
| Related documents: | User manual (10.8 MB) |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
FVS-2
MH-42C6J
MH-48A6JA
|
Voice guide unit
Hand microphone
DTMF microphone
|
|
