RigPix logo

QYT logo


Back to main

Back to QYT

Next mobile VHF/UHF


Copyright logo


Last modified 2023-07-17

Valid HTML 4.01 Transitional

QYT KT-8900D

A picture of QYT KT-8900D

SPECIFICATIONS

GENERAL
Type:Amateur VHF/UHF transceiver
Frequency range: TX: 136-174 / 400-480 MHz
RX: 88-108 / 136-174 / 400-480 MHz
Tuning steps:2.5 / 5 / 6.25 / 10 / 12.5 / 25 KHz
Frequency stability:±? ppm
Mode:TX: FM / NFM
RX: FM / NFM / WFM
Channels / memory management:200 regular
Repeater shift / offset:±?-? MHz
Power supply:13.8 VDC ±15%
Current drain / power consumption:RX: ? mA
TX: ? A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):98*43*126 mm (3.86*1.69*4.96")
Weight:448 g (0.99 lb)
Other features: DTMF. CTCSS/PL. DCS. 2-tone and 5-tone.
PC programmable.




RECEIVER SECTION
Receiver system: ? conversion superheterodyne
Sensitivity: FM: 0.25 uV (No reference)
NFM: 0.35 uV (No reference)
Selectivity:
Image rejection:
AF output power / speaker:2 W at 10% distortion / ? ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

HighLow
2 m:25 W15 W
70 cm:20 W12 W
Modulation system:
Max FM deviation (Factory set):FM: ±5 KHz
NFM: ±2.5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:? ohms / 8-pin (Modular)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:China, 201x-201x
Additional info:
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of QYT KT-8900D