| GENERAL |
| Type: | Professional land mobile VHF transceiver |
Frequency range
depending on version: |
134.000-173.995 MHz in five 10 MHz bands
134.300-174.2875 MHz in five 10 MHz bands
|
| Tuning steps: | Channelized (Programmable in 5 or 12.5 KHz increments) |
| Frequency stability: | ? ppm |
| Mode: | FM or NFM |
| Channels / memory management: |
8 regular (Diode matrix programmable)
|
| Duplex shift / offset: | Any, within the selected 10 MHz band |
| Power supply: | 13.6 VDC |
| Current drain / power consumption: | RX: Max 1 A @ 1.5 W audio output
TX: Max 10 A |
| Antenna impedance / connector: | 50 ohm / SO-239 |
| Dimensions (W*H*D): | 180*40*252 mm (7.09*1.58*9.92") |
| Weight: | 2 Kg (4.41 lb) |
| Other features: | |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: 21.4 MHz
2nd IF: 455 KHz
|
| Sensitivity: | 0.35 uV (12 dB SINAD) |
| Squelch sensitivity: | |
| Selectivity: | 70 dB (Adjacent channel) |
| Image rejection: | 80 dB |
| AF output power / speaker: | 1.5 W at 10% distortion / 8 ohm |
| External speaker connector: | 4-8 ohm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
Max 40 W
|
| Modulation system: | 16F3 phase modulation |
| Max FM deviation (Factory set): | ±±5 KHz (5 KHz step version)
±2.5 KHz (12.5 KHz step version) |
| Spurious emissions: | Better than -60 dB |
| Microphone impedance / connector: | 600 ohms / 6-pin |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Japan, 1981-198x (Discontinued) |
| Additional info: |
FCC ID: AKH9TUFTC-2640
|
| Related documents: |
RF final: 2SC2630
|
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
