GENERAL |
Type: | Amateur band HF/(VHF) receiver |
Frequency range: |
10-160 m in seven bands (6 m / 2 m / 1.25 m options)
160 m: |   1.8-2.0 MHz |
80 m: |   3.5-4.0 MHz |
40 m: |   7.0-7.3 MHz |
20 m: |   14.0-14.4 MHz |
15 m: |   21.0-21.5 MHz |
11 m: |   26.5-27.5 MHz |
10 m: |   28.0-29.7 MHz |
|
Tuning steps: | Analog / continuous |
Frequency stability: | ? ppm |
Mode: | AM / SSB / CW |
Channels / memory management: |
None
|
Power supply: | Mains: 105-130 VAC |
Current drain / power consumption: | 60 W |
Antenna impedance / connector: | 50-300 ohm / ? |
Dimensions (W*H*D): | 495*286*381 mm (19.5*11.25*15") |
Weight: | 25.9 Kg (57 lb) |
Other features: | |
|
|
|
|
RECEIVER SECTION |
Receiver system: |
Double conversion superheterodyne
1st IF: 2.215 MHz
2nd IF: 80 KHz
|
Sensitivity: | 1.5 uV (No reference) |
Selectivity: |
Selectable
8, 3.5 KHz and 500 Hz
|
Image rejection: | Better than 50 dB |
AF output power / speaker: | 1 W at ?% distortion / No internal speaker |
External speaker connector: | 8 ohm |
|
|
|
|
MISCELLANEOUS |
Manufactured: | USA, 1955-1958 (Discontinued) |
Additional info: | 13 tubes |
Related documents: | |
Modifications and fixes: | |
Reviews: |
CQ: October 1955
QST: January 1956, page 44
|
Options / Accessories: |
BC-300C1
NC-300C2
NC-300C6
NC-300CC
NC-300TS
XCU-300
|
1.25 m converter
2 m converter
6 m converter
Converter cabinet
Matching speaker
Calibrator
|
|