RigPix logo

Other receiver & scanner brands logo

Back to main

Back to Other RX & scanners

Next SDR

SDRplay logo

Copyright logo

Last modified 2024-02-07

Valid HTML 4.01 Transitional


A picture of SDRplay RSP1B


Type:HF/VHF/UHF 14-bit SDR receiver
Frequency range:0.001-2000 MHz
Tuning steps:Depending on software
Frequency stability:0.5 ppm @ -10 to +60C (14 to 140F)
Mode:Depending on software
Channels / memory management:Depending on software
Power supply:5 VDC (Via USB 2.0 port)
Current drain / power consumption:Max 185 mA (Excluding bias tee)
Antenna impedance / connector:50 ohm / SMA jack
Dimensions (W*H*D):94*35*98 mm (3.7*1.38*3.86")
Weight:315 g (11.11 oz)
Other features: Ten high-selectivity front end filters. Selectable FM, MW and DAB
notch filters. Up to 10 MHz of spectrum can be monitored.
14-bit ADC. Switchable 4.7 VDC bias tee output.
SDRUno and SDRconnect software included. Other popular SDR packages
will also be supported.

Receiver system: SDR
Image rejection:
Output IQ sample rate:2 to 10.66 MSPS
Output IQ bandwidth:
AF output power / speaker:-
External speaker connector:-

Manufactured:England, 2024-202x
Additional info: Basically an enhanced RSP1A with significantly
improved noise performance, housed in a black steel case.

Maximum recommended input power on the antenna
port: 0 dBm (10 dBm for short periods)

New price, february 2024 in England: 106
New price, february 2024 in Sweden: SEK 2095:-
Related documents: Tech info (231 KB)
Modifications and fixes:
Options / Accessories:
- -