| GENERAL |
| Type: | HF/VHF/UHF SDR receiver |
| Frequency range: |
0.001-2000 MHz
|
| Tuning steps: | Depending on software |
| Frequency stability: | ±0.5 ppm @ -30 to +85°C (-22 to +185°F) |
| Mode: | Depending on software |
| Channels / memory management: | Depending on software |
| Power supply: | 5.1 VDC (USB-C) |
| Current drain / power consumption: | Less than 600 mA |
| Antenna impedance / connector: | 50 ohm / Two SMA jacks (1 KHz to 2 GHz)
50 ohm / BNC (1 KHz to 200 MHz) |
| Dimensions (W*H*D): | 200*40*105 mm (7.87*1.58*4.13") |
| Weight: | 800 g (1.76 lb) |
| Other features: |
A truly plug-n-play integrated networked receiver combined with a host
computer and more, all in one box. When connected to the internet via
ethernet or WiFi, it can be accessed from anywhere. It can also be used
locally via USB.
14-bit ADC. Twelve high-selectivity front end filters. Selectable FM, MW
and DAB notch filters. Three software selectable antenna ports. Up to
10 MHz of spectrum can be monitored and recorded. External reference
clock input (MCX jack). 4.7 VDC bias tee output on port B. SDRUno and
SDRconnect software included. Other popular SDR packages are also
supported.
|
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
SDR
|
| Sensitivity: | |
| Selectivity: | |
| Image rejection: | |
| Output IQ sample rate: | 2 MSPS-10.66 MSPS |
| Output IQ bandwidth: | |
| AF output power / speaker: | No |
| External speaker connector: | No |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | England, 2024-202x |
| Additional info: |
Maximum recommended input power on the antenna
ports: 0 dBm (10 dBm for short periods).
|
| Related documents: |
Tech info (240 KB)
|
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
