RigPix logo

Marine transceivers logo


Back to main

Back to Marine transceivers

Next Marine transceiver


Uniden logo


Copyright logo


Last modified 2024-10-03

Valid HTML 4.01 Transitional

Uniden HH-979XL

A picture of Uniden HH-979XL

SPECIFICATIONS

GENERAL
Type:Marine VHF transceiver
Frequency range: TX: 156.025-157.425 MHz
RX: 156.050-163.275 MHz
Tuning steps:Channelized
Frequency stability:? ppm
Mode:FM
Channels / memory management: Australian and international channels
10 NOAA weather channels
Duplex shift / offset:Automatic according to bandplan
Power supply:? VDC
Current drain / power consumption:RX: ? mA
TX: Max ? A
Antenna impedance / connector:50 ohm / ?
Dimensions (W*H*D):62*150*37 mm (2.44*5.91*1.46")
Weight:370 g (13 oz)
Other features: Channel 16 switch. DTMF keypad. Dual watch. Scanning.
Telstra Seaphone compatible.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 21.4 MHz
2nd IF: 445 KHz
Sensitivity:0.5 uV (12 dB SINAD)
Squelch sensitivity:1.6 uV (Tight)
Selectivity:60 dB (Adjacent channel)
Image rejection:
AF output power / speaker:500 mW at ?% distortion / 8 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power: High: 5 W
Low: 1 W
Modulation system:
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -16 dBm
Microphone impedance / connector:? ohm / ?-pin
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Philippines, 19xx-19xx (Discontinued)
Additional info:
Related documents:User manual (7.2 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -