RigPix logo

Marine transceivers logo


Back to main

Back to Marine transceivers

Next Marine transceiver


Icom logo


Copyright logo


Last modified 2024-12-19

Valid HTML 4.01 Transitional

Icom IC-M80

A picture of Icom IC-M80

SPECIFICATIONS

GENERAL
Type:Marine VHF transceiver
Frequency range: TX: 156.025-157.425 MHz
RX: 156.050-163.275 MHz
Tuning steps:Channelized
Frequency stability:0.0005% @ -20 to +60°C (-4 to +140°F)
Mode:FM
Channels / memory management: All US and international channels
10 user programmable
10 NOAA weather channels
Duplex shift / offset:Automatic according to bandplan
Power supply:13.6 VDC (Male 6-pin jack)
Current drain / power consumption:RX: 300-800 mA
TX: Max 5.5 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):228*78*208 mm (8.98*3.07*8.19")
Weight:2.1 Kg (4.63 lb)
Other features:Channel 16 button. Dual watch. Hailer. Scanning. Dimmer.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 21.4 MHz
2nd IF: 455 KHz
Sensitivity:0.3 uV (20 dB quieting)
Squelch sensitivity:0.2 uV (Threshold)
2 uV (Tight)
Selectivity:25 KHz (-70 dB)
Image rejection:80 dB
AF output power / speaker:5 W at 10% distortion / 4 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power: High: 25 W
Low: 1 W
Modulation system:
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -70 dBc
Microphone impedance / connector:600 ohm / ?-pin
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1982-198x (Discontinued)
Additional info: FCC ID: AFJ9XU IC-M80.
Related documents:User manual (12.3 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of Icom IC-M80