RigPix logo

Marine transceivers logo


Back to main

Back to Marine transceivers

Next Marine transceiver


Furuno logo


Copyright logo


Last modified 2025-01-15

Valid HTML 4.01 Transitional

Furuno FS-1575

A picture of Furuno FS-1575

SPECIFICATIONS

GENERAL
Type:Marine HF transceiver
Frequency range: TX: 1.605-27.5 MHz
RX: 0.1-30 MHz
Tuning steps:10 Hz
Frequency stability:? ppm
Mode:TX: SSB / CW / WEFAX
RX: AM / SSB / CW / WEFAX
Channels / memory management: 256 RX/TX pairs, user programmable
All ITU channels
Duplex shift / offset:According to bandplan
Power supply:24 VDC
Current drain / power consumption:RX: 5 A
TX: Max 20 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D): Control unit: 258*108*93 mm (10.16*4.25*3.66")
Transceiver: 340*208*472 mm (13.39*8.19*18.6")
Weight: Control unit: 1.9 Kg (4.2 lb)
Transceiver: 16 Kg (35.3 lb)
Other features:GMDSS. Dual watch.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 53.964 MHz
2nd IF: 36 KHz
Sensitivity: SSB (20 dB SINAD)
0.1-0.3 MHz: 35 dBuV
0.3-1.6 MHz: 25 dBuV
1.6-4.0 MHz: 13 dBuV
4.0-30 MHz: 7 dBuV
Squelch sensitivity:
Selectivity:
Image rejection:
AF output power / speaker:3 W at ?% distortion / 4 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power: SSB: Max 150 W PEP
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / ?-pin
Microphone input level:? mV




MISCELLANEOUS
Manufactured:2011-201x (Discontinued)
Additional info:
Related documents: User manual (22.8 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -