RigPix logo

Marine transceivers logo


Back to main

Back to Marine transceivers

Next Marine transceiver


Furuno logo


Copyright logo


Last modified 2024-11-28

Valid HTML 4.01 Transitional

Furuno FM-2510

A picture of Furuno FM-2510

SPECIFICATIONS

GENERAL
Type:Marine VHF transceiver
Frequency range: TX: 155.500-158.825 MHz
RX: 155.500-163.425 MHz
Tuning steps:Channelized
Frequency stability:±1.5 KHz @ -20 to +55°C (-4 to +131°F)
Mode:FM
Channels / memory management: US and international channels
10 NOAA weather channels
10 user programmable
Duplex shift / offset:Automatic according to bandplan
Power supply:11-15 VDC
Current drain / power consumption:RX: 300-500 mA
TX: Max 5.5 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):135*45*170 mm (5.34*1.78*6.72")
Weight:950 g (2.1 lb)
Other features:Channel 16 button. Dual watch. Scanning. Dimmer.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 16.9 MHz
2nd IF: 455 KHz - Ceramic filter: CFW455E
Sensitivity:0.5 uV (12 dB SINAD)
Squelch sensitivity:0.4 uV (Threshold)
1.1 uV (Tight)
Selectivity:70 dB (Adjacent channel)
Image rejection:
AF output power / speaker:500 mW (4 W external) at 10% distortion / 8 ohm
External speaker connector:TS "Minijack" (3.5 mm), 4 ohm




TRANSMITTER SECTION
RF output power: High: 25 W
Low: 1 W
Modulation system:
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -70 dB
Microphone impedance / connector:? ohm / 6-pin
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1987-199x (Discontinued)
Additional info:
Related documents: User manual (3.5 MB)
RF pre driver: 2SC2347
RF driver: 2SC2053
RF power module: M57710-A
Modifications and fixes:
Reviews:
Options / Accessories:
- -