RigPix logo

Marine transceivers logo


Back to main

Back to Marine transceivers

Next Marine transceiver


Aqua-Marine logo


Copyright logo


Last modified 2024-10-09

Valid HTML 4.01 Transitional

Aqua-Marine 5600

A picture of Aqua-Marine 5600

SPECIFICATIONS

GENERAL
Type:Marine VHF transceiver
Frequency range: TX: 156.050-157.850 MHz
RX: 156.300-162.025 MHz
Tuning steps:Channelized
Frequency stability:±0.0005% @ -10 to +50°C (14 to 122°F)
Mode:FM
Channels / memory management: All international channels plus the UK "M" channel
Duplex shift / offset:Automatic according to bandplan
Power supply:13.5 VDC (Male 3-pin jack)
Current drain / power consumption:RX: 450-700 mA
TX: 1-4.5 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):210*85*280 mm (8.27*3.35*11")
Weight:2 Kg (4.41 lb)
Other features:Channel 16 button. Channel M button. Dimmer. Dual watch.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 21.4 MHz
2nd IF: 455 KHz
Sensitivity:0.25 uV (12 dB SINAD)
Squelch sensitivity:0.15 uV (Treshold)
1 uV (Tight)
Selectivity:15 KHz (-6 dB)
30 KHz (-60 dB)
Image rejection:
AF output power / speaker:3 W at 10% distortion / 8 ohm
External speaker connector:TS "Minijack" (3.5 mm)




TRANSMITTER SECTION
RF output power: High: 25 W
Low: 1 W
Modulation system:
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -75 dB
Microphone impedance / connector:600 ohm / 4-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:198x-198x (Discontinued)
Additional info:
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of Aqua-Marine 5600