GENERAL |
Type: | Marine VHF transceiver |
Frequency range: |
TX: 156.025-157.425 MHz
RX: 156.050-162.550 MHz
|
Tuning steps: | Channelized |
Frequency stability: | ±10 ppm @-20 to +50°C (-4 to +122°F) |
Mode: | FM |
Channels / memory management: |
All US and international channels
4 NOAA weather channels
|
Duplex shift / offset: | Automatic according to bandplan |
Power supply: | 11.6-15.6 VDC (2-pin male locking ring jack) |
Current drain / power consumption: | RX: Max 400 mA (Squelched) TX: Max 5.5 A |
Antenna impedance / connector: | 50 ohm / SO-239 |
Dimensions (W*H*D): | 240*80*245 mm (9.4*3.1*9.6") |
Weight: | 3.4 Kg (7 lb) |
Other features: | Channel 16 button. Dimmer. |
|
|
|
|
RECEIVER SECTION |
Receiver system: |
Double conversion superheterodyne
1st IF: 16.9 MHz
2nd IF: 455 KHz
|
Sensitivity: | 0.35 uV (12 dB SINAD) |
Squelch sensitivity: | Less than 0.3 uV (Treshold) 0.5-2.0 uV (Tight) |
Selectivity: | 70 dB (Adjacent channel) |
Image rejection: | 70 dB |
AF output power / speaker: | 4 W at 10% distortion / 3.2 ohm |
External speaker connector: | |
|
|
|
|
TRANSMITTER SECTION |
RF output power: |
High: 25 W
Low: 1 W
|
Modulation system: | |
Max FM deviation (Factory set): | ±5 KHz |
Spurious emissions: | Better than -70 dBc |
Microphone impedance / connector: | ? ohm / 4-pin (Male locking ring jack) |
Microphone input level: | ? mV |
|
|
|
|
MISCELLANEOUS |
Manufactured: | 1979-198x (Discontinued) |
Additional info: |
FCC Data: APELCO CLIPPER 82
|
Related documents: | User manual (3.4 MB) |
Modifications and fixes: | |
Reviews: | |
Options / Accessories: |
|