RigPix logo

Kenwood/Trio logo


Back to main

Back to Kenwood/Trio

Next base VHF/UHF


Copyright logo


Last modified 2023-09-15

Valid HTML 4.01 Transitional

Trio TR-2E

A picture of Trio TR-2E

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: TX: 144-148 MHz
RX: 144-148 MHz
Tuning steps:Analog / continuous
Frequency stability:
Mode:AM
Channels / memory management:1 XTAL-controlled TX channel
Repeater shift / offset:No
Power supply:Mains: 117 / 230 VAC
or 12 VDC
Current drain / power consumption:RX: 106 VA @ 117 VAC
TX: 146 VA @ 117 VAC
Antenna impedance / connector:50-100 ohm / SO-239
Dimensions (W*H*D):302*168*324 mm (11.88*6.62*12.75")
Weight:10.1 Kg (22.2 lb)
Other features:




RECEIVER SECTION
Receiver system: Triple conversion superheterodyne
1st IF: 44-45 MHz
2nd IF: 10.7 KHz
3rd IF: 455 KHz
Sensitivity:2 uV (10 dB S/N)
Selectivity:20 KHz (-20 dB)
Image rejection:
AF output power / speaker:3 W at ?% distortion / 8 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power: ~10 W (20-24 W input)
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:Hi-Z / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1967-19xx (Discontinued)
Additional info:6360 final
Related documents: User manual (4.3 MB)
Service manual (4.8 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -