| GENERAL |
| Type: | Amateur VHF transceiver |
| Frequency range: |
Europe and Japan
TX: 144-146 MHz)
RX: 144-149 MHz
USA
TX: 144-148 MHz
RX: 144-149 MHz
|
| Tuning steps: | 5 / 10 / 100 KHz |
| Frequency stability: | 0.002% |
| Mode: | FM |
| Channels / memory management: | 1 priority (Diode matrix programmable) |
| Repeater shift / offset: | ±600 KHz |
| Power supply: | 13.5 VDC ±10% (2-pin connector) |
| Current drain / power consumption: | RX: 0.8-1 A
TX: Max 4 A |
| Antenna impedance / connector: | 50 ohm / SO-239 |
| Dimensions (W*H*D): | 165*54*195 mm (6.5*2.13*7.5") |
| Weight: | 2.1 Kg (4.63 lb) |
| Other features: | |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: 16.9 MHz
2nd IF: 455 KHz
|
| Sensitivity: | 0.5 uV (20 dB quieting) |
| Selectivity: | 12 KHz (-6 dB)
24 KHz (-40 dB) |
| Image rejection: | >60 dB |
| AF output power / speaker: | 4 W at 10% distortion / 4 ohm |
| External speaker connector: | 3.5 mm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
|
| Modulation system: | Direct frequency modulation of VCO |
| Max FM deviation (Factory set): | ±5 KHz |
| Spurious emissions: | Better than -60 dB |
| Microphone impedance / connector: | 600 ohm / 4-pin (Metal locking ring connector) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Japan, 1977-197x (Discontinued) |
| Additional info: | New price 1977 in the US: $389.00 |
| Related documents: |
User manual (2.6 MB)
Enhanced schematic diagram (318 KB)
|
| Modifications: | |
| Reviews: | |
| Options/Accessories: |
|
SC-10
|
CTCSS/PL encoder/decoder unit
|
|
