RigPix logo

Icom logo


Back to main

Back to Icom

Next mobile VHF/UHF


Copyright logo


Last modified 2023-09-19

Valid HTML 4.01 Transitional

Icom ID-800D

A picture of Icom ID-800D

SPECIFICATIONS

GENERAL
Type:Amateur VHF/UHF transceiver
Frequency range: Japanese domestic market
TX: 144-146 / 430-440 MHz
RX: 118-174 / 230-550 / 834-915 / 960.1-1000 MHz
Tuning steps:5 / 6.25 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 / 100 / 200 KHz
Frequency stability:±2.5 ppm @-10 to +60°C (14 to 140°F)
Mode:TX: FM / NFM and DV (D-Star)
RX: AM / NAM / FM / NFM and DV (D-Star)
Channels / memory management: 500 regular
2 call
5 scan edge pairs
Non-volatile EEPROM storage
Repeater shift / offset:Programmable
Power supply:13.8 VDC ±15%
Current drain / power consumption:RX: 0.9 to 1.1 A
TX: 5 to 12.5 A
Antenna impedance / connector:50 ohm / N-jack
Dimensions (W*H*D):Transceiver: 141*40*186 mm (5.55*1.58*7.32")
Control head: 111*40*39 mm (4.37*1.58*1.54")
Weight:Transceiver: 1.2 Kg (2.65 lb)
Other features: CTCSS/PL with tone scan. DTCS & DTMF. Detachable control head.
Attenuator. 1200/9600 bd packet jack. Multi color backlite.
Dimmer. GPS option.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 46.05 MHz
2nd IF: 450 KHz
Sensitivity: FM: 0.18 uV (12 dB SINAD)
DV: 0.35 uV (BER 1%)
Selectivity: FM
12 KHz (-6 dB)
30 KHz (-60 dB)
NFM
6 KHz (-6 dB)
20 KHz (-60 dB)
Image rejection:60 dB
AF output power / speaker:2 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm, 8 ohm




TRANSMITTER SECTION
RF output power:

HighMidLow
2 m:50 W15 W5 W
70 cm:50 W15 W5 W
Modulation system:
Max FM deviation (Factory set):FM: ±5 KHz
NFM: ±2.5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:600 ohm / 8-pin (Modular)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 2004-200x (Discontinued)
Additional info:
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
CS-D800
HM-103
HM-118N
HM-133
MB-17A
OPC-347
OPC-440
OPC-441
OPC-474
OPC-478
OPC-478U
OPC-600
OPC-601
OPC-647
OPC-1132
OPC-1384
SP-10
Cloning software
Hand microphone
Standard hand microphone
Remote control microphone
Mobile mounting bracket
DC power cable, 20 A. 7 m (23 ft)
Mic extension cable. 5 m (16.4 ft)
Speaker extension cable. 5 m (16.4 ft)
Cloning cable (Radio-to-radio). 5 m (16.4 ft)
Cloning cable, RS232C (Radio-to-PC). 5 m (16.4 ft)
Cloning cable, USB (Radio-to-PC)
Separation cable. 3.5 m (11.5 ft)
Separation cable. 7 m (23 ft)
Mic extension cable. 2.5 m (8.2 ft)
DC power cable, 20 A. 3 m (9.8 ft)
Data cable, RS232C. 8-pin DIN to 9-pin DSUB
External speaker