RigPix logo

Icom logo


Back to main

Back to Icom

Next HF and more


Copyright logo


Last modified 2023-09-19

Valid HTML 4.01 Transitional

Icom IC-701

A picture of Icom IC-701

SPECIFICATIONS

GENERAL
Type:Amateur HF transceiver
Frequency range: TX: 10-160 m
RX: 1.8-2.0 / 3.5-4.0 / 7.0-7.5 / 14.0-15.2 / 21.0-21.5 / 28.0-30.0 MHz
Tuning steps:100 Hz / 10 KHz
Frequency stability:Less than 500 Hz after power on
Less than 100 Hz after 60 minutes
Mode:SSB / CW / RTTY
Channels / memory management:None
Repeater shift / offset:No
Power supply:13.6 VDC ±15%
Current drain / power consumption:RX: ? mA
TX: Max 18 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):241*111*311 mm (9.5*4.4*12.2")
Weight:7.3 Kg (16.1 lb)
Other features:PBT. NB. VOX. Transverter jack, IF output jack. SWR-meter.




RECEIVER SECTION
Receiver system: Triple conversion superheterodyne
1st IF: 9.0115 MHz
2nd IF: 10.75 MHz
3rd IF: 9.0115 MHz
Sensitivity:0.25 uV (10 dB S+N/N)
Selectivity: SSB/RTTY
2.4 KHz (-6 dB)
4 KHz (-60 dB)
CW
500 Hz (-6 dB)
1.4 KHz (-60 dB)
CW-N (Optional)
200 Hz (-6 dB)
1 KHz (-60 dB)
Image rejection:
AF output power / speaker:1.5 W at ?% distortion / 8 ohm
External speaker connector:3.5 mm, 8 ohm




TRANSMITTER SECTION
RF output power: 0-100 W adjustable
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -60 dB
Microphone impedance / connector:600 ohm / 4-pin (Metal locking ring connector)
Microphone input level:~10 mV (Typical)




MISCELLANEOUS
Manufactured:Japan, 1978-1979 (Discontinued)
Additional info:
Related documents:User manual (6.2 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
IC-RM2
IC-RM3
IC-SM2
IC-701PS
Computerized remote controller (USA)
Computerized remote controller (Europe)
Electret desk microphone
AC power supply. 13.8 VDC, 20 A
A rear picture of Icom IC-701