GENERAL |
Type: | Amateur VHF transceiver |
Frequency range: |
Japanese domestic market
TX: 50-54 MHz
RX: 50-54 MHz
|
Tuning steps: | 100 Hz, 1 / 10 KHz |
Frequency stability: | ±1 KHz @ -10 to +60°C (14 to 140°F) |
Mode: | FM / SSB / CW |
Channels / memory management: |
3 regular
2 band edge (for programmed scan)
RAM storage
|
Repeater shift / offset: | ±? |
Power supply: | 13.8 VDC ±15% |
Current drain / power consumption: | RX: 640 to 870 mA TX: 1.4 to 2.9 A |
Antenna impedance / connector: | 50 ohm / SO-239 |
Dimensions (W*H*D): | 185*64*223 mm (7.28*2.52*8.78") |
Weight: | 2.7 Kg (5.95 lb) |
Other features: | |
|
|
|
|
RECEIVER SECTION |
Receiver system: |
Single conversion superheterodyne (SSB/CW) 1st IF: 9.01 MHz
Double conversion superheterodyne (FM) 1st IF: 9.01 MHz 2nd IF: 455 KHz
|
Sensitivity: |
FM: 0.6 uV (20 dB noise quieting)
SSB/CW: 0.5 uV (10 dB S+N/N)
|
Selectivity: |
FM
15 KHz (-6 dB) 30 KHz (-60 dB)
SSB/CW
2.4 KHz (-6 dB) 4.8 KHz (-60 dB)
|
Image rejection: | |
AF output power / speaker: | 2 W at ?% distortion / 8 ohm |
External speaker connector: | 3.5 mm |
|
|
|
|
TRANSMITTER SECTION |
RF output power: |
|
Modulation system: | |
Max FM deviation (Factory set): | ±5 KHz |
Spurious emissions: | Better than -60 dB |
Microphone impedance / connector: | 1.3 Kohm / 8-pin (Metal locking ring connector) |
Microphone input level: | ? mV |
|
|
|
|
MISCELLANEOUS |
Manufactured: | Japan, 1979-1980 (Discontinued) |
Additional info: | |
Related documents: | |
Modifications and fixes: | |
Reviews: | |
Options / Accessories: |
BC-10A
IC-3PB
IC-CK1
IC-HM7
IC-HM8
IC-HM10
IC-SM5
|
Memory backup AC power supply
AC power supply. 13.8 V, 3 A
Memory backup DC power cord
Standard hand microphone
Hand microphone with DTMF pad
Hand microphone with up/down buttons
Desk microphone
|
|