RigPix logo

Icom logo


Back to main

Back to Icom

Next HT/portable


Copyright logo


Last modified 2023-09-18

Valid HTML 4.01 Transitional

Icom IC-4SE

A picture of Icom IC-4SE

SPECIFICATIONS

GENERAL
Type:Amateur UHF transceiver
Frequency range: Europe
TX: 430-440 MHz
RX: 430-440 MHz
Tuning steps:? KHz
Frequency stability:Max ? ppm
Mode:FM
Channels / memory management:
Repeater shift / offset:±
Power supply:6-16 VDC
Current drain / power consumption:RX: 19-250 mA
TX: Max 1.6 A
Antenna impedance / connector:50 ohm / BNC
Dimensions (W*H*D):49*103*33 mm (1.93*4.06*1.3"), with BP-82
Weight:270 g (9.52 oz), with BP-82
Other features:




RECEIVER SECTION
Receiver system: ? conversion superheterodyne
Sensitivity:
Selectivity:
Image rejection:
AF output power / speaker:? mW at ?% distortion / ? ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

High
@13.8 V
High
@7.2 V
Low 3
@13.8 V
Low 3
@7.2 V
Low 2Low 1
70 cm:5 W2 W3.5 W2 W1.5 W500 mW
Modulation system:
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / ?-pin
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1989-199x (Discontinued)
Additional info:
Related documents:User manual (1.9 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
BP-81
BP-82
BP-83
BP-84
BP-85
BP-90
UT-50
UT-51
NiCd battery pack. 7.2 V, 110 mAh
NiCd battery pack. 7.2 V, 300 mAh
NiCd battery pack. 7.2 V, 600 mAh
NiCd battery pack. 7.2 V, 1000 mAh
NiCd battery pack. 12 V, 340 mAh
Battery case. Six LR6/AA batteries
CTCSS/PL tone squelch unit (Encoder/decoder)
CTCSS/PL encoder unit