| GENERAL |
| Type: | Amateur UHF transceiver |
| Frequency range: |
USA
TX: 440-450 MHz
RX: 440-450 MHz
|
| Tuning steps: | 5 / 10 / 12.5 / 15 / 20 / 25 KHz, 1 MHz |
| Frequency stability: | ±10 ppm @ -10 to +60°C (14 to 140°F) |
| Mode: | FM |
| Channels / memory management: |
20 regular
1 call
2 scan edge
|
| Repeater shift / offset: | ±?-? in 25 KHz steps |
| Power supply: | 13.8 VDC ±15% |
| Current drain / power consumption: | RX: Max 500-800 mA
TX: 4 to 9.5 A |
| Antenna impedance / connector: | 50 ohm / N-jack (On pigtail) |
| Dimensions (W*H*D): | 140*40*155 mm (5.5*1.6*6.1") |
| Weight: | 1 Kg (2.2 lb) |
| Other features: | CTCSS/PL encoder. |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: 30.875 MHz
2nd IF: 455 KHz
|
| Sensitivity: | 0.16 uV (12 dB SINAD) |
| Selectivity: | |
| Image rejection: | |
| AF output power / speaker: | 2.4 W at 10% distortion / 8 ohm |
| External speaker connector: | 3.5 mm, 4-8 ohm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
| High | Low 3 | Low 2 | Low 1 |
|---|
| 70 cm: | 35 W | 20 W | 10 W | 5 W |
|
| Modulation system: | Variable reactance frequency modulation |
| Max FM deviation (Factory set): | ±5 KHz |
| Spurious emissions: | Better than -60 dB |
| Microphone impedance / connector: | 600 ohm / 8-pin (Metal locking ring connector) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Japan, 1990-199x (Discontinued) |
| Additional info: | |
| Related documents: |
User manual (4.7 MB)
Service manual (16.8 MB)
|
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
HM-56
HM-58
HM-59
HS-15
HS-15SB
MB-27
MB-34
OPC-044B
PS-30
SM-6
SM-8
SP-7
SP-10
SP-12
UT-50
UT-55
|
Hand microphone with DTMF memory
Hand microphone
Hand microphone with 1750 Hz tone call
Flexible mobile microphone
Switchbox for HS-15
Mobile mounting bracket
Joint plates
DC power cable
AC power supply. 13.8 VDC, 25 A
Desk microphone
Desk microphone with dual line outputs
External speaker. 8 ohm, 5 W
External speaker. 4 ohm, 5 W
External speaker. 8 ohm, 3 W
Tone squelch unit
DTMF encoder/decoder unit
|
|
