RigPix logo

Icom logo


Back to main

Back to Icom

Next base VHF/UHF


Copyright logo


Last modified 2024-11-06

Valid HTML 4.01 Transitional

Icom IC-351

A picture of Icom IC-351

SPECIFICATIONS

GENERAL
Type:Amateur UHF transceiver
Frequency range: Japanese domestic market
TX: 430-440 MHz
RX: 430-440 MHz
Tuning steps:100 Hz, 1 / 10 / 20 KHz
Frequency stability:0.001% @ -10 to +60°C (14 to 140°F)
Mode:FM / SSB / CW
Channels / memory management: 3 regular
1 call
Repeater shift / offset:No dedicated. Use VFO A/B split
Power supply:Mains: 100 VAC ±10% (3-pin IEC C14 connector)
or 13.8 VDC ±15%
Current drain / power consumption:RX: 600 to 840 mA @ 13.8 VDC
TX: 1.6 to 3.5 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):241*141*264 mm (9.49*5.55*10.39")
Weight:7.2 Kg (15.87 lb)
Other features:NB. VOX.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne (SSB/CW)
1st IF: 39.38 MHz
2nd IF: 10.75 MHz
Triple conversion superheterodyne (FM)
1st IF: 39.38 MHz
2nd IF: 10.75 MHz
3rd IF: 455 KHz
Sensitivity: FM: 0.6 uV (20 dB quieting)
SSB/CW: 0.5 uV (10 dB S+N/N)
Squelch sensitivity: FM: Less than 0.4 uV (Treshold)
SSB/CW: Less than 0.6 uV (Treshold)
Selectivity: FM
15 KHz (-6 dB)
30 KHz (-60 dB)
SSB/CW
2.4 KHz (-6 dB)
4.8 KHz (-60 dB)
Image rejection:
AF output power / speaker:2 W at 10% distortion / 8 ohm
External speaker connector:TS "Minijack" (3.5 mm), 8 ohm




TRANSMITTER SECTION
RF output power: 1-10 W adjustable
Modulation system:FM: Variable reactance
SSB: Balanced
Max FM deviation (Factory set):±12 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:1.3 Kohm / 8-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1980-198x (Discontinued)
Additional info:
Related documents:
Modifications and fixes:
Reviews:
Options/Accessories:
IC-HM7
IC-HM10
IC-HP1
IC-MB5
IC-SM5
Standard hand microphone
Hand microphone with up/down buttons
Headphones
Mobile mounting bracket
Desk microphone
A rear picture of Icom IC-351