RigPix logo

Icom logo


Back to main

Back to Icom

Next mobile VHF/UHF


Copyright logo


Last modified 2023-09-18

Valid HTML 4.01 Transitional

Icom IC-250

A picture of Icom IC-250

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: Japanese domestic market
TX: 144-146 MHz
RX: 144-146 MHz
Tuning steps:Channelized
Frequency stability:±? ppm
Mode:FM
Channels / memory management: 22 regular (Diode matrix)
Repeater shift / offset:
Power supply:13.8 VDC ±15% (2-pin connector)
Current drain / power consumption:RX: 400-700 mA
TX: 0.9 to 2 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):156*58*218 mm (6.14*2.28*8.58")
Weight:1.9 Kg (4.19 lb)
Other features:




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz - Ceramic filter: CFU455E
Sensitivity:1 uV (30 dB S+N/N)
Selectivity:15 KHz (-6 dB)
30 KHz (-60 dB)
Image rejection:
AF output power / speaker:1.5 W at 10% distortion / 8 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

HighLow
2 m:10 W1 W
Modulation system:
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:600 ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 197x-197x (Discontinued)
Additional info:Early PLL transceiver
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
IC-3PA
SM-2
AC power supply. 13.5 VDC, 3 A
Desk microphone
A rear picture of Icom IC-250