RigPix logo

Icom logo


Back to main

Back to Icom

Next mobile VHF/UHF


Copyright logo


Last modified 2023-09-19

Valid HTML 4.01 Transitional

Icom IC-2340

A picture of Icom IC-2340

SPECIFICATIONS

GENERAL
Type:Amateur VHF/UHF transceiver
Frequency range: Japanese domestic market
TX: 144-146 / 430-440 MHz
RX: 144-146 / 430-440 MHz
Tuning steps:5 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 KHz
Frequency stability:Max ? ppm
Mode:FM
Channels / memory management: 50 regular
2 scan edges
2 call (1 per band)
Non-volatile EEPROM storage
Repeater shift / offset:±?
Power supply:13.8 VDC ±15%
Current drain / power consumption:RX: 1.2-1.8 A (Dual band receive)
TX: Max 5 A
Antenna impedance / connector:50 ohm / SO-239 (On pigtail)
Dimensions (W*H*D):140*40*165 mm (5.51*1.58*6.5")
Weight:1.3 Kg (2.87 lb)
Other features:CTCSS/PL encoder. Twin RX.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 17.2 MHz (VHF), 30.85 MHz (UHF)
2nd IF: 455 KHz
Sensitivity:0.16 uV (12 dB SINAD)
Selectivity:15 KHz (-6 dB)
30 KHz (-60 dB)
Image rejection:
AF output power / speaker:2.4 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm, 8 ohm




TRANSMITTER SECTION
RF output power:

HighMidLow
2 m:10 W5 W1 W
70 cm:10 W5 W1 W
Modulation system:Variable reactance frequency modulation
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:600 ohm / 8-pin modular (On pigtail)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1994-199x (Discontinued)
Additional info:
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
- -