GENERAL |
Type: | Amateur VHF transceiver |
Frequency range: |
Japanese domestic market
TX: 144-146 MHz
RX: 144-146 MHz
|
Tuning steps: | 5 KHz (FM) 100 Hz and 5 KHz (USB/CW) |
Frequency stability: | Less than ±1.5 KHz @ -10°C to +60°C (14° to 140°F) |
Mode: | FM / USB / CW |
Channels / memory management: | None |
Repeater shift / offset: | No |
Power supply: | 13.8 VDC ±15% (3-pin connector) |
Current drain / power consumption: | RX: 600-800 mA TX: 1.4 to 2.8 A |
Antenna impedance / connector: | 50 ohm / SO-239 |
Dimensions (W*H*D): | 155*90*235 mm (6.1*3.54*9.25") |
Weight: | 2.7 Kg (5.95 lb) |
Other features: | RIT. Auto dimmer. NB. |
|
|
|
|
RECEIVER SECTION |
Receiver system: |
Single conversion superheterodyne (USB/CW)
IF: 10.7 MHz
Double conversion superheterodyne (FM)
1st IF: 10.7 MHz
2nd IF: 455 KHz
|
Sensitivity: |
FM: 0.6 uV (20 dB noise quieting)
USB/CW: 0.5 uV (10 dB S+N/N)
|
Selectivity: |
FM
15 KHz (-6 dB) 30 KHz (-60 dB)
USB/CW
2.4 KHz (-6 dB) 4.8 KHz (-60 dB)
|
Image rejection: | |
AF output power / speaker: | 1.5 W at ?% distortion / 8 ohm |
External speaker connector: | 3.5 mm, 8 ohm |
|
|
|
|
TRANSMITTER SECTION |
RF output power: |
| High | Low |
FM: | 10 W | 1 W |
SSB (PEP): | 10 W | - |
CW: | 10 W | - |
|
Modulation system: |
FM: Variable reactance frequency modulation
SSB: Balanced
|
Max FM deviation (Factory set): | ±5 KHz |
Spurious emissions: | Better than -60 dB |
Microphone impedance / connector: | 600 ohm / 4-pin (Metal locking ring connector) |
Microphone input level: | ? mV |
|
|
|
|
MISCELLANEOUS |
Manufactured: | Japan, 197x-197x (Discontinued) |
Additional info: |
See also: IC-245 (USA version) and IC-245E (European version)
|
Related documents: | |
Modifications and fixes: | |
Reviews: | |
Options / Accessories: |
IC-RM1
SM-2
|
Computerized remote controller
Desk microphone
|
|